38
4.3 Electrical Specifications
The AP7131 and AP7131N Access Points have the following electrical characteristics:
Operating Voltage
Operating Current
Power
4.4 AP7131 Radio Specifications
An AP7131 has the following radio characteristics:
Operating Channels
Data Rates Supported 802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps
Wireless Medium
Network Standards
Maximum Available
Transmit Power
Transmit Power
Adjustment
Antenna
Configuration
48VDC (compatible with POE .3af/.3at Draft)
Not to exceed 750mA @ 48VDC
48VDC, 0.75A
All channels from 4920 MHz to 5825 MHz except channel
52 -64
Channels 1-13 (EU), Channels 1-11 (US/Canada)
Channel 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing (OFDM)
Spatial multiplexing (MIMO)
802.11a, 802.11b, 802.11g, 802.3, 802.11n (Draft 2.0)
20dBm
1dB increments
2x3 or 3x3
AP7131 Series Access Point