Setting Up Mypal; Placing On The Cradle; Connecting The Ac Adapter - Asus MyPal A600 User Manual

Setting up MyPal

Placing on the cradle

Position the device on the cradle as shown
on the right. Match the connectors and
carefully insert the device until it fits in place.

Connecting the AC adapter

• Connect the AC adapter cable to the connector at the back of the cradle.
Connect the power plug to a grounded wall socket. See Figure 1.
• If you are not using the cradle, connect the AC adapter cable directly to
the power connector at the bottom of the device. Connect the power plug
to a grounded wall socket. See Figure 2.
Figure 1
1-6
The illustration on the left shows MyPal
properly installed on the cradle.
Figure 2
Chapter 1