Table of Contents
Advertisement
6.
Select C r e a t e n e w R A I D - 1
C r e a t e n e w R A I D - 1
C r e a t e n e w R A I D - 1
C r e a t e n e w R A I D - 1 from the RAID-1 Build Option menu, then
C r e a t e n e w R A I D - 1
press <Enter>. Refer to the options description below.
• Create a New RAID-1
Create a New RAID-1
Create a New RAID-1 - The default option. Select this option when
Create a New RAID-1
Create a New RAID-1
creating a new RAID 1 set.
• Copy from ( 0) to ( 1)
Copy from ( 0) to ( 1)
Copy from ( 0) to ( 1)
Copy from ( 0) to ( 1) - Select this option when you want to copy
Copy from ( 0) to ( 1)
the source drive contents to a target drive, provided that the source is
equal to or smaller than the target drive.
Copy from ( 1) to ( 0)
Copy from ( 1) to ( 0)
• Copy from ( 1) to ( 0)
Copy from ( 1) to ( 0)
Copy from ( 1) to ( 0) - Select this option when you want to copy
the source drive contents to a target drive, provided that the source is
larger than the target drive.
7.
When prompted, use the keyboard to assign a name for the RAID 1 set,
then press <Enter>.
8.
If you want to make the array
bootable, select Y e s
menu, then press <Enter>.
9.
When prompted to create the RAID
1 set, select <Yes>, then press
<Enter>.
The utility erases all data from the selected hard disk drives. Make sure to
backup all important data before creating a RAID set.
10. When a confirmation dialogue box
appears, select <Yes>, then press
<Enter>.
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
A S U S R S 1 6 0 - E 3 / P S 4
Y e s
Y e s
Y e s from the
Y e s
6 - 1 1
6 - 1 1
6 - 1 1
6 - 1 1
6 - 1 1
Advertisement
Table of Contents
