Table of Contents
Advertisement
Optimum temperature and humidity
^ Press the constant humidity button to
save the setting.
^ Press the On/Off button to come out
of the setting mode. If you do not do
this, the appliance will automatically
switch over to normal operation after
a few minutes.
Humidity level
In a conventional refrigerator, the
humidity levels are too low for storing
wines. High humidity levels (60 - 70 %)
are very important for the storage of
wine, so that the corks remain moist.
Under low humidity, the corks dry out
from the outside and can no longer seal
the bottles properly. This is why wine
bottles should always be stored lying
down, so that the wine can keep the
corks moistened from within. If air
enters the bottle, a wine will inevitably
spoil.
Tip: Wine bottles should stand
upright for at least two hours before
serving, or, better still whole day
long, to enable deposits to settle to
the bottom of the bottle.
14
Constant humidity (Dynamic cooling)
button m
This setting enables the relative
humidity (and temperature) inside the
wine cooler to be distributed evenly
throughout the interior, so that you can
store all your wine under exactly the
same excellent conditions.
Turning on Dynamic Cooling
If you would like to use the wine cooler
to store wine for the long term, the
constant humidity setting should be
activated. This will create a continuous
climate inside the appliance, imitating
that of a wine cellar.
^ Press the constant humidity button
m. The indicator light will come on.
Even if this setting has not been
activated, the fan in the appliance
will come on automatically when the
cooling system switches on, to
ensure your wine is kept in the
optimum climate.
The fan automatically switches off
when the door is open.
Hide quick links:
Advertisement
Table of Contents
