Toshiba Strata AirLink User Manual page 16

Charge the Batteries
Step 2: Charge the Batteries
1. Remove the handset's carrying case, if it has one.
2. Turn the power OFF.
3. Insert the handset (with the battery in
it) in the front slot of the charger base
(shown at right).
The Handset LED changes to amber
and then to red. This indicates rapid
charging.
If you place a fully charged battery
Note
in the charger base, it detects the
charged condition and cancels
rapid charging. The Handset LED
changes to amber, red, and then
green.
4. If you have a spare battery, insert it in the rear slot of the charger base.
The Battery LED changes to amber while waiting for the handset to finish
charging or alternates between green and amber to indicate discharge is in
progress.
5. Remove the handset or spare battery when the LEDs change to a steady green.
The steady green LED indicates a fully charged element. The charger base
switches to a "trickle charge" until you remove the handset or battery.
Do not use the handset before its battery has completed the rapid
Important!
charge cycle (steady red), even if the battery icon reports full strength.
The handset has reduced talk/standby time under these conditions.
8
——————————————————————————————————
Battery LED
Handset LED
Strata AirLink External Wireless Handset