Frequently Asked Questions
General problems with the dishwasher
Problem
The indicators and the
display is dark. Only
the "Start/Stop" K
indicator flashes
slowly.
Detergent residue is left
in the dispenser at the
end of a program.
The detergent
dispenser lid cannot be
closed properly.
The door and the
interior walls are still
wet after a program has
finished.
Water remains in the
wash cabinet at the end
of a program.
50
Possible fault
The display goes into
"Standby" mode to save
energy
The dispenser was
damp when detergent
was added.
Detergent residue is
blocking the catch.
This is not a fault.
It is the normal
operating mode of the
drying system.
The triple filter in the
wash cabinet is
clogged.
The drain pump or the
non-return valve may
be blocked.
The drain hose is
kinked.
Solution
Press the K button.
Standby is ended.
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
– Press the K button to turn
the dishwasher off.
Clean the triple filter (see
"Cleaning and care").
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
Remove any kinks from the
drain hose.