Fujitsu Lifebook U904 Operating Manual

Fujitsu Lifebook U904 Operating Manual

Hide thumbs Also See for Lifebook U904:
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU LIFEBOOK U904

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu Lifebook U904

  • Page 1 System Operating Manual FUJITSU LIFEBOOK U904...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2014. All rights reserved. Publication Date 06/14 Order No.: A26391-K394-Z320-1-7619, edition 2...
  • Page 5 FUJITSU LIFEBOOK U904 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
  • Page 7: Table Of Contents

    Setting up WLAN access ............33 Fujitsu...
  • Page 8 The external monitor is blank or the image is unstable ........56 Fujitsu...
  • Page 9 Index ................. . 63 Fujitsu...
  • Page 10 Contents Fujitsu...
  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
  • Page 13: Ports And Controls

    8 = Touchpad buttons 4 = ON/OFF switch 9 = Status indicators 5 = Microphone 10 = Loudspeaker Left side 1 = DC input connector (DC IN) 3 = USB port 3.0 2 = Security Lock 4 = Headphones/microphone/Line-In/ Line-Out/headset-combi port Fujitsu...
  • Page 14 4 = LAN connector (removable) 2 = USB port 3.0 (with charging function 5 = SIM card slot (Anytime USB charge)) 3 = HDMI port Bottom 1 = Port Replicator port 3 = Loudspeakers 2 = Reset button (countersunk) Fujitsu...
  • Page 15: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...
  • Page 16: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 61). Fujitsu...
  • Page 17: Notebook: Transporting

    The surface may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has been dipped in water mixed with mild domestic detergent and then carefully wrung out. To clean the keyboard and the Touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...
  • Page 18: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...
  • Page 19: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
  • Page 20: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
  • Page 21: Working With The Notebook

    The indicator is illuminated (orange): The mains adapter is connected and the battery is being charged. • The indicator flashes red: a fault has occurred. • The indicator is not illuminated: the mains adapter is not connected. Batterystatusindicator Batterysymbol Rechargeablebatteryindicator Fujitsu...
  • Page 22 Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. ECO button This key starts the Power Saving Utility with which components, which are not currently required, can be switched off to save energy. Fujitsu...
  • Page 23: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu...
  • Page 24: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 25: Key Description

    The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
  • Page 26: Virtual Numeric Keypad

    Other key combinations are described in the relevant manuals supplied with your application programs. Key combinations are entered as follows: ► Press the first key in the combination and keep it pressed. ► While holding the first key down, press the other key or keys in the combination. Fujitsu...
  • Page 27 This setting is useful if you would like a high resolution and a high refresh rate on an external monitor. Fn+F10 Togglemonitor output Switch between open applications Use this key combination to switch between several open applications. Alt+Tab Fujitsu...
  • Page 28: Country And Keyboard Settings

    The touchpad buttons allow you to select and execute commands. They correspond to the buttons on a conventional mouse. You can also deactivate the touchpad using a keyboard shortcut, so that you cannot move the cursor unintentionally (see chapter "Key combinations", Page 22). Fujitsu...
  • Page 29: Moving The Pointer

    ► Tap the touchpad twice or press the left button twice. The command is executed. Dragging items ► Select the desired item. Touchpad ► Press and hold the left button and, with your finger on the touchpad, drag the item to the desired position. The item will be moved. Fujitsu...
  • Page 30: Touchscreen/Lcd Screen Without Touch Function (Device-Dependent)

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.
  • Page 31: Using Fingers

    fingers together. Data must be entered for some apps, for Input fields instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu...
  • Page 32: Webcam

    If you would like to perform a function test of your web cam, there is suitable test software available at "http://www.fujitsu.com/fts/support/index.html". Rechargeable battery Rechargeablebattery...
  • Page 33: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...
  • Page 34: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu...
  • Page 35: Loudspeakers And Microphones

    ► Place the SIM card in the holder and slide the SIM card into the slot, with the contacts facing downwards, until you feel it click into place (1). ► Close the cover of the SIM card slot (2). Fujitsu...
  • Page 36: Removing A Sim Card

    (1) and close the cover of the SIM card slot (2). Wireless LAN/Bluetooth/UMTS/LTE radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ►...
  • Page 37: Setting Up Wlan Access

    Access via UMTS/LTE You can purchase the accessories for UMTS/LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS/LTE module, your device will already be prepared when you receive it.
  • Page 38: Ethernet And Lan

    ► Connect the network cable to your network port. Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Fujitsu...
  • Page 39: Your Port Replicator

    2 = USB ports 7 = DC input connector (DC IN) 3 = LAN port 8 = Connector on the Port Replicator for the docking port on the underside 4 = DisplayPort of the notebook 5 = DVI port Fujitsu...
  • Page 40: Connecting The Notebook To The Port Replicator

    Port Replicator (2). ► Place the notebook on the Port Replicator, press down centrally on the edge (3, on the same side as the hinge joint) and ensure that the notebook engages. Fujitsu...
  • Page 41 Check the position of the locking levers using your fingers. ► Place the notebook on the Port Replicator, press down centrally on the edge (3, on the same side as the hinge joint) and ensure that the notebook engages. Fujitsu...
  • Page 42: Connecting The Mains Adapter To The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu...
  • Page 43: Disconnecting The Notebook From The Port Replicator

    Working with the notebook Disconnecting the notebook from the Port Replicator ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...
  • Page 44: Security Functions

    The hand vein pattern sensor can record the image of the pattern of the veins of the hand. This image is evaluated by additional software and can be used instead of a password. ► To be able to use the hand vein pattern sensor (1), you must install the software. Fujitsu...
  • Page 45: Configuring The Fingerprint Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
  • Page 46: Configuring Password Protection In Bios Setup Utility

    The notebook is then rebooted and the new password comes into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...
  • Page 47: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The notebook will reboot. The system is no longer password-protected. Fujitsu...
  • Page 48: Password Protection For The Hard Disk

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...
  • Page 49: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...
  • Page 50: Connecting An External Monitor To The Port Replicator

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu...
  • Page 51: Hdmi Port

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...
  • Page 52: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...
  • Page 53: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on your notebook is a "3.5 mm jack". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...
  • Page 54: Removing And Installing Components During Servicing

    Removing and installing components during servicing Removing and installing components during servicing Only qualified technicians should repair your notebook. Unauthorised opening or incorrect repair may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty. Servicing Components Fujitsu...
  • Page 55: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
  • Page 56: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
  • Page 57: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...
  • Page 58: Using The Reset Key

    ► Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically. ► Click on the Desk Update button. ► Select Automatic driver installation (Express) and click on Start installation. ► Follow the instructions on the screen. ► Restart your notebook when the driver installation is completed. Fujitsu...
  • Page 59: The Notebook's Date Or Time Is Incorrect

    ► Press the key combination to switch the screen output, see "Key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu...
  • Page 60: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...
  • Page 61: The Notebook Cannot Be Started

    The printer driver is faulty or not correctly ► Check that the data cable connecting installed, or it is the wrong printer driver. the notebook to the printer is properly connected. ► Check whether the correct printer driver is loaded (refer to the printer documentation). Fujitsu...
  • Page 62: The Radio Connection To A Network Does Not Work

    Keyboard controller error ► Switch the notebook off with the ON/OFF switch. ► Wait 3 - 5 seconds and switch on the notebook again. Keyboard error If you are using an external keyboard: ► Check the connection and reboot the notebook. Fujitsu...
  • Page 63 ► Contact your sales outlet or our customer service centre. System cache error - Cache disabled ► Contact your sales outlet or our customer service centre. System timer error ► Contact your sales outlet or our customer service centre. Fujitsu...
  • Page 64: Technical Data

    The data sheet for the device provides further technical data. You can find the data sheet on your device or you can download it from the Internet at "http://www.fujitsu.com.fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com.fts/support/".
  • Page 65: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...
  • Page 66: Other Certification Markings

    Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix - Additional Certifications" supplement. If such markings are available, you can find the supplement on the Internet at "http://support.ts.fujitsu.com/Manuals/" with the Operating Manual for your device. Fujitsu...
  • Page 67: Index

    / removing 50 Configuration, BIOS Setup Utility 51 Connecting audio devices 49 Hand vein pattern sensor 40 Connecting headphones 49 Setting up 40 Crystal View display Hard disk: cleaning 13 restoring the contents 54 Cursor control keys 21 Fujitsu...
  • Page 68 Port Replicator 35 inserting 30 Power removing 30 power consumption 29 Microphone 31 power-management features 29 Mobile operation 12 Power indicator 17 Monitor Preparing for operation 15 connecting 46 Printer does not print 57 drifting display 56 remains blank 56 Fujitsu...
  • Page 69 Windows key 21 Wireless LAN Switching the module off 32 Switching the module on 32 Tab key 21 Wireless LAN: Technical data 60 safety notes 11 Mains adapter 60 notebook 60 The radio connection to a network does not work 58 Fujitsu...

Table of Contents