When To Change The Thread Catcher Pads Of The Sbd 450-3 Floor Tool And Upholstery Tool; Replacing The Thread Catchers; Servicing The Floor Roller Of The Sbd 450-3 Floor Tool - Miele S 4000 Operating Instructions Manual

When to change the thread
catcher pads of the SBD 450-3
floor tool and upholstery tool
The thread catcher pads on the bottom
of the SBD 450-3 floor tool and the
upholstery tool should be checked
occasionally. Replace the pads if they
appear worn.

Replacing the thread catchers

^ Use a knife or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
Servicing the floor roller of the
SBD 450-3 floor tool
^ Use a coin to release the roller pin
and take it out, a.
^ Push and take out the roller axle, b.
^ Take out the roller, c.
^ Remove all threads, hair, etc. and
reassemble the parts in the reverse
order.
Spare parts are available from your
Miele dealer or from Miele.
Maintenance and care
31