Advertisement
All electrical work should be
performed by a qualified electrician
in strict accordance with national
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer can
not be held responsible for
unauthorized work.
Ensure that power to the appliance
is OFF while installation or repair
work is performed.
Verify that the voltage, load and circuit
rating information found on the data
plate (located behind the grease
filters), match the household electrical
supply before installing the hood.
If there is any question concerning the
electrical connection of this appliance
to your power supply, please consult a
licensed electrician or call Miele's
Technical Service Department.
USA
1-800-999-1360
CDN
1-800-565-6435
24
The hood comes equippped with a 5 ft
(1.5 m) power cord with a NEMA 5-15
molded plug for connection to a
120 VAC, 60 Hz, 15 A power outlet.
Maximum load
DA 252-3 . . . . . . . . . . . . . . . . . . . 456 W
DA 251, DA 259-3 . . . . . . . . . . . 436 W
Lighting
DA 252-3 . . . . . . . . . . . . . . . . . 4 x 20 W
DA 251, DA 259-3 . . . . . . . . . . 3 x 20 W
Indirect lighting . . . . . . . . . . . . 2 x 13 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V
Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit rating. . . . . . . . . . . . . . . . . . 15 A
Hide quick links:
Advertisement
