Advertisement
Quick Links
Advertisement
Related Manuals for D-Link DAS-3324
Summary of Contents for D-Link DAS-3324
- Page 1 DAS-3 3 2 4 I P DSL AM Q u i c k St a r t G u i d e Version: 1.0 Date: 2006/07/10...
- Page 3 MDF, CPE (ATU-R) router and user’s computer. One thing is important – always set the VPI/VCI value for the CPE the same as the ones configured in DAS-3324. The default setting for VPI/VCI of IP DSLAM is 8/35. By the way, the values for these devices can be changed (yet must match with CPE) if necessary.
- Page 4 No matter what tool you would like to use for managing DAS-3324 device, the first thing you have to do is making correct port connection. Connect to a PC through UP port. Connect to a PC through It is useful for controlling the CONSOLE port.
-
Page 5: How To Check The Version Information
$get system info How to Save the Configuration To save the configuration for the DSL module Type the following command to save the configuration. Next time, the saved configuration will be invoked after powering on the device. $commit D-Link Confidential... - Page 6 DHCP server. How to Configure IP Address for Slave-Standalone Device There are two types of DAS-3324 device that user might have. One is the device with two fast-ethernet interface version; the other is the device with one gigabit-ethernet interface version.
- Page 7 $get adsl atur channel ifname dslf-* for upstream/fast channel (*: 0 ~ 23) $get adsl atuc channel ifname dsli-* for downstream/interleave channel (*: 0 ~ 23) $get adsl atur channel ifname dslf-* for upstream/fast channel (*: 0 ~ 23) D-Link Confidential...
- Page 8 $modify adsl line intf ifname dsl-* disable Disable (*: 0 ~ 23) $modify adsl line profile ifname dsl-* type Necessary variables (*: 0 ~ 23) fastOnly atucfastmaxtxrate 0x7e0000 $modify adsl line intf ifname dsl-* enable Enable (*: 0 ~ 23) D-Link Confidential...
- Page 9 <vci> lowif atm-* [vcmux/llcmux] [fast/interleaved] $create eoa intf ifname eoa-* lowif aal5-* (*:0~191 is used for aal5 and eoa) $create bridge port intf portid (*:0~191 is used for eoa,; 1~192 is used for <bridge-port-id> ifname eoa-* <bridge-port-id>) D-Link Confidential...
- Page 10 Create a host to capture the traps. community <community> How to Create VLAN Users can use the following command to create VLAN. The commands are listed as below. Command Description $create vlan static vlanname <vlan-name> Create VLAN valnid <vlan-id> [egressports <bridge ports>] D-Link Confidential...
- Page 11 1 srcportfrom 137 srcportto 139 srcportcmp inrange $modify filter rule entry ruleid <id> status enable $create filter rule map ifname all ruleid <id> stageid 1 $create filter rule entry ruleid <id2> action drop description NETBIOS-UDP $create filter subrule udp ruleid <id2> D-Link Confidential...
- Page 12 Users can use the following command to remotely upgrade control plane code. Make sure you have prepared TFTP server, vendor supplied CP.bin.gz , and put CP.bin.gz into root directory of TFTP server. The commands are listed as below. Command Description D-Link Confidential...
- Page 13 Download session Completed, Bytes received 1991180... $reboot Reboot from Default mode Wizard Commands In addition to the primitive commands described as above. Several wizard commands are provided which is used easily. Type wizard to see the command syntax. Command Description D-Link Confidential...
- Page 14 <filename> <server ip> config restore <filename> <server ip> --------------------------------------------------------- dsl show [fast] Display all the 24 ports DSL status firmware upgrade Upgrade firmware without removing the existing one in advance config backup/restore Backup or restore the current configuration D-Link Confidential...