Installation Accessories; Installation Instructions; Recirculation Mode - Miele DA 403 Operating And Installation Instructions

Installation

Installation accessories

4 Screws 8 x 60 mm with
4 Washers
(S10 wall anchors included in the
packaging are not for use in USA / CDN)
2 spring clips to hang the hood onto
the mounting plate
4 Flat head screws M 6 x 20 mm with
nose and
4 M 6 locking nuts for securing the
motor assembly
1 hose clip for securing the ducting
28

Installation instructions

See the enclosed installation instruction
sheet.
Please read the "Important Safety
Instructions" and Installation
instructions before installing this hood.

Recirculation mode

If site conditions are not suitable for the
hood to be used for air extraction, the
appliance must be converted for
recirculation.
For recirculation mode a conversion kit
must be installed, available from Miele.
The conversion kit comes with an
Installation manual.
After the hood is installed the charcoal
filter must be inserted and the charcoal
filter timer must be set. See "Cleaning
and Care" and "Operation".