Table of Contents
Advertisement
About the indicators on the display
1
2
;
LFE
SW
L
C
R
SL
SR
qa
Name
Function
A SW
Lights up when the audio signal
is output from the
SUBWOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C ; D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
"AUTO" (page 34).
D OPT
Lights up when INPUT MODE
is set to "AUTO" and the source
signal is a digital signal being
input through the OPTICAL
jack.
E DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
"AUTO" (page 34).
3
D
4
5
OPT
DTS
COAX
0
Name
Function
F MEMORY
Lights up when a memory
function, such as Preset
Memory (page 33), etc., is
activated.
G Tuner
Lights up when using the
indicators
receiver to tune in radio stations
(page 31), etc.
H Preset
Lights up when using the
station
receiver to tune in preset radio
indicators
stations. For details on
presetting radio stations, see
page 33.
I D.RANGE
Lights up when dynamic range
compression is activated.
J COAX
Lights up when DVD/BD input
is selected. However, "NO
INPUT" appears on the display
if no digital signal is input
through the COAXIAL jack.
7
6
ST
MEMORY
MONO
D.RANGE
9
8
continued
5
GB
Advertisement
Table of Contents
