Table of Contents
Advertisement
18
www.aeg.com
8.10 Residual heat indicator
When you deactivate the oven, the
display shows the residual heat.
8.11 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
cooling fan can continue to operate until
the appliance cools down.
8.12 Oven automatic switch-
off
For safety reasons the appliance
deactivates automatically after some
time if a heating function operates and
you do not change any settings.
Temperature
30 °C - 115 °C
120 °C - 195 °C
200 °C - 245 °C
250 °C - maximum
°C
After the Automatic switch-off, press a
sensor field to operate the appliance
again.
The oven automatic switch-
off does not work with the
Duration or End function.
8.13 Using the Core
temperature sensor
The core temperature sensor measures
the core temperature of the meat.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
1. Put the point of the core temperature
sensor into the centre of the meat.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
2. Put the plug of the core temperature
sensor into the socket on the side of
the appliance.
3. Activate the appliance.
4. Press
again and again until the
main oven appears.
5. Set the core temperature:
a. Press
again and again until
the function core temperature
sensor flashes and the display
shows the core temperature.
The default core
temperature is 60 °C.
b. Press
or
seconds to set the core
temperature.
The core temperature is displayed from
30 °C.
6. Set the oven function and, if
necessary, the oven temperature
.
While the appliance calculates the
approximate end time, the display
shows a square that flashes.
The appliance calculates the
approximate end time for the set core
temperature again and again. The
display constantly shows the new
approximate end time.
7. Press a button to stop the signal.
An acoustic signal sounds, when the
meat is at the set core temperature.
8. Remove the plug of the core
temperature sensor from the socket .
Remove the meat from the
appliance.
9. Deactivate the appliance.
in less than 5
/
Hide quick links:
Advertisement
Table of Contents
