Facility Names And Functions - Hitachi DK-H200 Operating Instructions Manual

Facility names and functions

1
1. Lens mount
Bayonet type lens mount.
2. SDI OUT connector
HD-SDI/SD-SDI signal output.
3. MON OUT connector
HD-SDI/SD-SDI signal output with character.
4. GL IN connector
External sync signal input
(Tri-level sync or Black burst)
5. DC IN connector
12V DC is supplied.
6. POWER LED
Off: Camera power is off.
Lights (green): Camera power is on.
7. REMOTE1 connector
Connection for remote control unit or personal
computer.
Refer to page 20.
8. LENS connector
Connection for lens plug.
2
3
4
5
9. FILTER button
It combines with the L/R button, and the ND
filter is controlled.
It combines with the U/D button, and the ECC
filter is controlled.
10. D button
Menu mode: The menu cursor moves down.
Direct mode: Color bar signal output.
11. R button
Menu mode: Change the menu data.
Direct mode: Hold the button depressed for
longer than 2 seconds for automatic
black balance(ABB) adjustment.
12. U button
Menu mode: The menu cursor moves up.
Direct mode: Not used
13. L button
Menu mode: Change the menu data.
Direct mode: Hold the button depressed for
longer than 2 seconds for automatic
white balance(AWB) adjustment.
14. MENU button
The function menu is displayed.
15. VF OUT connector
Connection for viewfinder.
16. REMOTE2 connector
RJ-45 connector. DK-H200 can be controlled via
LAN. Regarding a network setting. Refer to
page15.
17. REMOTE1 switch
Switch for remote control unit or personal
computer. Refer to page20.
3
RS-232C
RU
6 7 8
16
15
17
14
13
12
11
10
9