BEFORE DRIVING
TO TIGHTEN
To tighten the belt, pull the free end of the
belt across alongside the lap strap.
TO LOOSEN
BOJS029
1-25
To lengthen, release the latch plate from
the buckle, pull the latch plate (adjuster) in
the direction of the arrow, at right angles to
the belt. The latch plate should then be
refitted into the buckle and the belt tight-
ened as previously described.
To unfasten the belt, press the release but-
ton on the buckle catch.
BOJS031
NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, "CENTER" is
molded on the buckle and latch plate of the
center lap belt. The buckles are designed
so a latch plate can not be inserted into the
wrong buckle.
Driver's Seat Belt Reminder
There are two kinds of operations on the
driver's seat belt reminder depending on
the vehicle's specification.
EXAMPLE
52LM004
Type 1
When the driver doesn't buckle his or her
seat belt with the ignition switch in the "ON"
position, the driver's seat belt reminder
light in the instrument cluster will blink until
the driver's seat belt is buckled.
Type 2
When the driver doesn't buckle his or her
seat belt, the driver's seat belt reminder
light in the instrument cluster will come on
or blink and a buzzer will sound as a
reminder to the driver to buckle his or her
seat belt. For more details, refer to the
explanation below.
If the driver's seat belt remains unbuckled
when the ignition switch is turned to the