Speaker (Manual Setup); Power Amp Assign - Yamaha Aventage RX-A1050 Owner's Manual

Speaker (Manual Setup)

Configures the speaker settings manually.
• Some speaker settings are not available depending on the selected "Power Amp Assign" setting.
• Default settings are underlined.
■
Setting Pattern
Registers two speaker setting patterns and switches between them.
When you configure the following speaker settings, the settings will be memorized in
the selected pattern.
• Measurement results (Auto Setup)

• Power Amp Assign

• Configuration
• Distance
• Level
• Parametric EQ
Settings
Pattern1, Pattern2
• The setting pattern currently selected is shown at the top of the "Manual Setup" screen.
• This function is useful when you want to save certain settings according to the varying conditions of your
listening environment. For example, if you want to switch the settings when curtains are open or closed,
you can save the settings suited for each condition and switch between them.
■
Setting Data Copy
Copies the "Setting Pattern" parameters in the specified direction.
Choices
Pattern1 > 2 Copies the "Pattern1" parameters to "Pattern2".
Pattern2 > 1 Copies the "Pattern2" parameters to "Pattern1".
■
Power Amp Assign
Selects a speaker system.
The unit has 7 built-in amplifiers. You can connect 2 to 9 speakers and up to 2
subwoofers (with built-in amplifier) to create the favorite acoustic space in your room.
You can also apply bi-amp connections, channel expansion (using an external power
amplifier) or multi-zone configurations to enhance your system.
Settings
Select this option when you use the basic speaker configuration (up to
Basic
7-channel plus front presence speakers) (p.17).
Select this option when you use 7-channel speakers in the main zone
7ch +1ZONE
and Zone2 speakers (p.24).
Select this option when you use 5-channel speakers (including bi-amp
5ch BI-AMP
front speakers) (p.23).
Select this option when you use 5-channel speakers (including bi-amp
5ch BI-AMP +SB front speakers) plus surround back channel expansion using an
external amplifier (p.24).
■
Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select "Large" if the woofer diameter of your speaker is 16 cm
(6-1/4") or larger or "Small" if it is smaller than 16 cm (6-1/4").
113
En