Siemens miniTEK Manual page 24

Connect the transmitter with the power plug to a
X X
power supply or charge it regularly.
Use one of the supplied cables to connect
X X
the transmitter to an external device
(refer to graphic on previous page).
Press on/off switch to turn the transmitter on.
X X
The LED on the transmitter flashes blue while
searching a connection to your miniTek.
Use the supplied adhesive tape to affix the transmitter
X X
at a suitable place.
Press
X X
on.
Press
X X
manually (refer to table "Changing the audio source"
in chapter "Basic function").
flashes while your miniTek is searching for a
connection and it shines constantly if a connection is
established.
The LED on the transmitter shines blue if a connection
is established.
24
for about 3 seconds to turn the miniTek
on miniTek to change to the audio source