Replacing The System Board; Procedure; Post-Requisites; Entering The Service Tag In The Bios Setup Program - Dell 5000 Series Service Manual

Replacing the system board

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
your computer, follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in
the BIOS setup program after you replace the system board.
NOTE: Replacing the system board removes any changes you have made to the BIOS using the
BIOS setup program. You must make the desired changes again after you replace the system board.

Procedure

1. Place the system board on the base frame.
2. Replace the screws that secure the system board to the base frame.
3. Replace the sim-card tray into the system board.
4. Place the I/O port covers on the system board.
5. Replace the screws that secure the I/O port covers to the system board.
6. Place the heat shield on the system board.
7. Replace the screws that secure the heat shield to the system board.

Post-requisites

1. Replace the base frame.
2. Replace the mobile broadband
3. Replace the wireless
4. Replace the solid-state
5. Replace the top cover.

Entering the Service Tag in the BIOS setup program

1. Turn on the computer.
2. Press F2 when the DELL logo is displayed to enter the BIOS setup program.
3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field.
38
Before working inside your
After working inside your
card.
card.
drive.
computer. After working inside
computer. For more safety
21