Installing The Power Connector Port; Removing The Keyboard - Dell latitude e5270 Owner's Manual

Installing the power connector port

1. Insert the power connector port into the slot on the computer.
2. Place the metal bracket on the power connector port.
3. Tighten the screw to secure the power connector port to the computer.
4. Route the power connector port cable through the routing channels.
5. Connect the power connector port cable to the connector on the system board.
6. Install the:
a. dock frame
b. battery
c. base cover
7. Follow the procedure in

Removing the keyboard

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. Disconnect the keyboard cables from the connectors on the system board [1, 2].
18
After working inside your
Before working inside your
computer.
computer.