Getting Started - Connecting Devices; Setup; Status Of Led Indication - Motorola FOCUS86 User Manual

3. Getting Started - Connecting Devices

How does it work?
FOCUS86
Camera
When a user tries to access the Camera, our Hubble server authenticates the
user's identity and permits access to the Camera.
3.1

Setup

Connect the Camera to the Power Adapter, then plug into an electrical outlet
and make sure the ON/OFF Switch is in the ON position. The Camera must be
within range of the Wi-Fi
password of the router is available for entering during the in-app setup process.

Status of LED Indication:

- Pair / Setup state:
- Unconnected state:
- Connected state:
- Ready for connection state: LED is blue and slow flashing
Note: You can only setup via a compatible smartphone or tablet and not via a PC.
8
Access your
Wi-Fi Router
Camera locally
Hubble Service
®
router with which you want to connect. Make sure the
LED is red and blue and slowly flashing
LED is red and slowly flashing
LED is blue and always on
View your Camera from
any compatible device
remotely
Getting Started - Connecting Devices