Connecting A Dvd Player Or Other S-Video Device - Mitsubishi Electric L423FR Owner's Manual

Connecting a DVD Player or Other S-Video Device Directly to
LCD Side Panel
NOTE: The LCD Display side panel connections shown below can only be used when the HD-6000 is not connected to
the LCD Display.
�
���
�����
�
�
�
�
�
�
�����
�
�
� �
�
�
�
�
����� ���
Figure 4. Connecting a DVD Player with Component Video.
See Appendix A, page 61, for component video
signal compatibility information.
For digital audio connections, see your DVD
and A/V receiver Owner' s Guides.
��� ������� ���� �����
�
���
�����
�����
���
�
Figure 5. Connecting an S-Video Device.
31
��� �������
���� �����
��� ���� �����
����� ���
�� ��
����������
��� �� �������� ��� �������������
��� ������
�������
������ �����
�����
����� ������ ����� ����
�
����� ����������� ���
������ ���
������������
� ����������� ��
���
���������� ������� �����������
�
�������� ����
��������� �������� ����� ������� ������� ���� �������� ����
������� �� �����
���� �� �����
�
��� ������� ������
����� ��� ����� �� ����� ���
� �
�����
�
�
�
� �
DVD Player/Video Game with
Component Video
(Figure 4)
1. Connect the Component Video cables from
(YCb Cr or Y Pb Pr) VIDEO OUT on the back
of the DVD player to COMPONENT VIDEO
INPUT on the LCD Display side panel. The correct
connections are:
Y to Y
A.
Cb or Pb to Pb
B.
Cr or Pr to Pr
C.
Connect a set of audio cables from AUDIO OUT
2.
on the back of the DVD player to COMPONENT
VIDEO Input/AUDIO RIGHT & AUDIO LEFT
on the LCD Display side panel.
• The red cable connects to the R (right)channel
• The white cable connects to the L (left) channel
NOTE: Some video game systems support component
connections. Please refer to your video game
console Owner's Guide.
NOTE: If your DVD player supports progressive
scan playback, be sure to set your player
accordingly. Please refer to your DVD player's
Owner's Guide.
Other S-Video Device
(Figure 5)
1. Connect a S-Video cable from VIDEO OUT on the
device back panel to VIDEO INPUT on the LCD
Display side panel.
2. Connect a set of audio cables from AUDIO OUT
on the device back panel to VIDEO INPUT/
AUDIO RIGHT & AUDIO LEFT on the LCD
Display side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel