Back And Side Panels - Mitsubishi Electric LT-37131 Owner's Manual

18
Chapter 1. Television Overview

Back and Side Panels

Side
Panel
1. ANT 1/MAIN, ANT 2/AUX ( Antenna)
If you are connecting an antenna, direct cable without
a cable box, or are using cable with a CableCARD™,
connect the main antenna or cable source to
ANT 1/MAIN.
ANT 1/MAIN and ANT 2/AUX can each receive both
digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD™
Use ANT 1/MAIN to receive premium subscription
cable TV service authorized by the CableCARD™ access
card. The CableCARD access card is provided by your
local cable company. ANT 2/AUX can continue to
receive over-the-air or non-scrambled cable signals when
ANT 1 is used for CableCARD™ service.
Back Panel
Back Panel 2
2. INPUT 1 and 2 Inputs
(Audio and Video)
INPUT 1 and 2 can be used to connect a VCR, Super
VHS (S-VHS) VCR, DVD player, standard satellite receiver,
or other A/V device to the TV. INPUT 3 is a third set
of jacks located in the front of the TV for convenience.
Please note that if S-VIDEO and VIDEO are both avail-
able, you must choose to connect only one.
3. COMPONENT 1 and 2 Inputs
(Audio and Video)
Y Pb Pr (480i/480p/720p/1080i)
Use these jacks to connect devices with component video
outputs, such as DVD players, external HDTV receivers, or
compatible video game systems. Please see Appendix B
for signal compatibility.
1