Control Keys - Mitsubishi Electric APRICOT 340 Owner's Handbook Manual

U s i n g t h e B I O S S e t u p U t i l i t y

Control keys

A number of keys are used to move around the BIOS Setup utility,
select items on the screen and change the current configuration. The
two lines at the bottom of the screen indicate what you can do at
any given time.
To select a line, press the and keys until
UP ARROW DOWN ARROW
the line you want is highlighted. If there are more lines than fit on
one screen, the screen will scroll. The and keys
PAGE UP PAGE DOWN
also work. To choose a selected action, press .
ENTER
To exit from a screen, press the key. To get help, select a line
ESC
and press 1.
F
Some lines are for information only. Others have fields you may
change. Changeable fields are enclosed in square brackets. Most
changeable fields allow you to select one of a few possible values.
To select a different value, use the and
LEFT ARROW RIGHT ARROW
keys. Some changeable fields require you to enter a number. You
may type numbers, press the (+) key to increment the current
PLUS
value or (–) to decrement it.
MINUS
To restore the previous setting for a line, press 9. To restore the
F
default setting, press 10.
F
Press at the main menu to exit from the utility. You are asked
ESC
whether or not you want to save any changes you have made to the
configuration in the computer's CMOS memory. If you save the
changes, the computer will reboot on exiting the utility.
The table on the next page summarizes these controls.
APRICOT 340 OWNER'S HANDBOOK 3/3