Table of Contents
Advertisement
2.2
Intended use
The device is a weather station for surface-mounting on buildings.
Depending on the setting, the movement detector responds to body heat and switches on the
lights.
The device is intended for the following:
Operation according to the listed technical data
■
Installation on walls of buildings
■
Use with the connecting options available on the device
■
The intended use also includes adherence to all specifications in this manual.
2.3
Improper use
Each use not listed in Chapter 2.2 "Intended use" on page 5 is deemed improper use and can
lead to personal injury and damage to property.
ABB is not liable for damages caused by use deemed contrary to the intended use of the
device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
Unauthorized structural changes
■
Repairs
■
Insert with an additional bus coupler
■
2.4
Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts
Technical Reference Manual 1473-1-8811
Safety
│5
Advertisement
Table of Contents
