Wps - D-Link DCH-S150 User Manual

Section 2 - Installation
Step 9:

WPS

If you tapped WPS and pressed the WPS button on your router in
the previous step, now press the WPS button on your DCH-S150.
The Status LED will start to blink green. Allow up to two minutes
to connect to your router. Tap Next to continue.
Note: You must press the WPS button, first on your router and then
on the DCH-S150, within two minutes.
After about two minutes, the Status LED will turn solid green. This
indicates that the DCH-S150 has successfully connected to your
wireless router. Tap Next to continue.
D-Link DCH-S150 User Manual 10