Yamaha RX-V3900 Owner's Manual page 97

Using examples
■ Example 1: Comparing the results of the
automatic setup and manual setup
This unit is equipped with three types of parametric
equalizer settings (page 79), and you can also make your
customized configuration of the sound settings of this unit
by using the "Speaker" parameters (page 76). To compare
the results of the automatic setup or your manual
configuration, use the 7SYSTEM MEMORY buttons.
SYSTEM MEMORY 1
Results of the automatic setup
(PEQ Select: Natural)
SYSTEM MEMORY 2
Results of the automatic setup
(PEQ Select: Front)
SYSTEM MEMORY
1 2
SYSTEM MEMORY 3
Settings configured manually
Saving each setting
1
Perform the automatic setup (page 30).
Press and hold 7 SYSTEM MEMORY 1 for
2
4 seconds.
This unit stores the results of the automatic setup
(PEQ Select: Natural) to "Memory1".
3
Set "PEQ Select" to "Front" (page 79).
Press and hold 7 SYSTEM MEMORY 2 for
4
4 seconds.
This unit stores the results of the automatic setup
(PEQ Select: Front) to "Memory2".
5
Configure the parameters of "Speaker"
(page 76) and parametric equalizer
configuration of each speaker manually
(page 79).
Press and hold 7 SYSTEM MEMORY 3 for
6
4 seconds.
This unit stores the settings configured manually to
"Memory3".
3 4
Saving and recalling the system settings (System Memory)
■ Example 2: Switching the settings for
different room environments
The tonal characteristics of the listening room may vary
depending on the situations of the room (for example,
whether the curtains are open or closed), and the settings
of this unit should be arranged for each situation of the
room. You can switch between the settings of this unit
easily by using 7SYSTEM MEMORY buttons.
SYSTEM MEMORY 1
The settings when the curtains of the
listening room are closed
SYSTEM MEMORY
1
2
SYSTEM MEMORY 2
The settings when the curtains of
the listening room are open
Saving each setting
1
Close the curtains of the listening room and
then perform the automatic setup (page 30).
Press and hold 7 SYSTEM MEMORY 1 for
2
4 seconds.
This unit stores the settings for the current room
situation (i.e. the curtains are closed) to "Memory1".
3
Open the curtains of the listening room and
the perform the automatic setup.
Press and hold 7 SYSTEM MEMORY 2 for
4
4 seconds.
This unit stores the current room situation (i.e. the
curtains are open) to "Memory2".
4
3
93
En