Related Manuals for LG LPT-OI551HQ
Summary of Contents for LG LPT-OI551HQ
-
Page 1: Dome Camera
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 1 Dome Camera Owner’s Manual MODEL: LPT-OI551HQ LPT-OI553HQ Before installing and using the camera, please read this owner's manual carefully and retain for future reference. - Page 2 LPT-OI553HQ_AA7ASLG_ENG 7/19/05 2:13 PM Page 2 Regulatory Notices For U.S.A CAUTION This equipment has been tested and found to comply RISK OF ELECTRIC SHOCK with the limits for a Class A digital device,pursuant to DO NOT OPEN Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful CAUTION: TO REDUCE THE RISK interference when the equipment is operated in a...
-
Page 3: Important Safety Instructions
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 3 IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. -
Page 4: Table Of Contents
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 4 Introduction Contents About Dome Camera The dome cameras are designed for installation in an Introduction ......5-7 indoor/outdoor video surveillance system. -
Page 5: Introduction
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 5 Pattern Function Alarm In function A routine of manual operations can be stored for 5 Alarm input signals are supplied from external minutes at the maximum and reproduced repeti- devices through the ALARM IN connector to turn tively. -
Page 6: Safety Precautions
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 6 Do not use the camera in such places as Safety Precautions shown below. The lens may become cloudy due to condensation Do not attempt to disassemble the camera if the camera is used under the following condi- To prevent electric shock,do not remove screws or tions. -
Page 7: Identification Of Camera
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 7 Identification of Camera 1 Camera mounting bracket The bracket is optional for surface installation. 2 Dome camera body 3 Dome cover 4 Power cable (DC 12V) 5 Video output cable with BNC connector Connects with the video connector of the monitor. 6 Data Communication Port (RJ45) - RS-485 and Alarm Input 7 Data Communication Port (RJ45) - RS-485 and Alarm Input 8 Fall Prevention Wire... -
Page 8: Installation
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 8 Installation Precautions Removing the Sponge • The following steps of installation and connection Before mounting the camera, remove the sponge for work should be done by qualified service person- camera protection. nel or system installers and should conform to all Caution: Remove the sponge carefully without local codes. -
Page 9: Pendant Mount
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 9 Pendant mount (Optional) Wall mount (Optional) -
Page 10: Setting The Switch
Function Effect When the camera is connected to the controller with LG protocol. The controller with LG protocol allow only limited control for this camera. When the camera is connected to the controller with LG Multix protocol. The controller with LG Multix protocol allow all control for this camera. -
Page 11: Camera Id Setting
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 11 The table for the camera ID setting Camera ID Setting This camera has the camera ID set to “0” at the time OFF OFF OFF OFF OFF OFF OFF OFF of the shipment. If you use 2 cameras or more simul- ON OFF OFF OFF OFF OFF OFF OFF... - Page 12 LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 12 ON OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON ON OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF...
- Page 13 LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 13 ON OFF OFF OFF OFF ON OFF OFF OFF OFF OFF OFF OFF ON OFF OFF OFF OFF OFF ON ON OFF OFF ON OFF OFF ON OFF OFF OFF OFF OFF ON ON OFF OFF OFF ON OFF OFF OFF OFF ON OFF OFF OFF...
-
Page 14: Connections
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 14 Connections Connection Preview DC 12V DC 12V cable for Camera Video output BNC plug data port Ethernet cable Ethernet cable data port White 8 ALARM IN 4 To Alarm sensors Blue 7 ALARM IN 3 Green 6 GND Yellow... -
Page 15: System Connection
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 15 System Connection Note: When any peripheral is turned off and turned on again, the camera is also turned off and turned back on. Alarm In #2 RS-485 Connection RS-485 Connection Alarm In #1 (TRX D+, TRX D-) (TRX D+, TRX D-) Adapter (Supplied) -
Page 16: Setup Menu
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 16 Setup Menu Setup Menu Overview Setup menus are shown in the table below. You can adapt the camera to your requirements by setting up the respective items in these menus. These menus are described on the following pages for reference. Switches and keys on the controller are used in the setup operations. -
Page 17: Setting Camera Menu
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 17 Setting Camera Menu 3. Use arrow (V, v) to select an option then press SEL (or ENT) button. The buttons on the connected controller are used for Submenu appears on the monitor. setup. MENU LCC-K1000 Controller (Optional) CAMERA ID FOCUS SET... -
Page 18: Camera Identification Setting
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 18 Focus Mode setting Camera Identification Setting The camera adjusts the focus automatically by sens- Only displays the camera’s ID. Use the internal ing the center of the picture. 8 bit-DIP switch if you want to set ID. Select [FOCUS MODE] option on the [FOCUS] •... -
Page 19: Zoom Start
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 19 Zoom Start setting Zoom Speed setting Selects a zoom start position. Selects a zoom speed. Select [ZOOM START] option on the [FOCUS] menu, Select [ZOOM SPEED] option on the [FOCUS] then select a zoom’s start position. (x1 - x26) menu, then select a zoom speed. -
Page 20: White Balance Control Settings
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 20 Setting the WBC (White Balance White Balance Control Settings Control) Mode You can set the white balance options using the You can select one of three modes for white balance [AWB] menu. adjustment. General Operation Select [WBC MODE] option on the [AWB] menu, then 1. -
Page 21: Exposure Settings
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 21 AE Mode setting Exposure Settings Selects an Automatic Exposure mode. You can set the exposure options using the [AE] Select [AE MODE] option on the [AE] menu, then menu. select an Automatic Exposure mode. General Operation •... -
Page 22: Agc Adjust
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 22 Automatic Gain Control (AGC) setting Backlight Setting Improves an image that is darkened because of If the images are too dark, change the maximum backlighting. [AGC] value to make the images lighter. This option is available only when [AE MODE] is set to [SLOW Select [BACKLIGHT] option on the [AE] menu, then MAN] or [SHUT MAN]. -
Page 23: E Sensitive
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 23 Electronic Sensitive setting Shutter Speed Setting The electronic sensitivity enhancement function You can select a shutter speed from among AUTO, varies the shutter speed to increase the sensitivity in 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, low light conditions. -
Page 24: Auto Exposure Level Settings
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 24 BLC (Back Light Compensation) Level Auto Exposure Level Settings Setting You can set the auto exposure options using the Selects a level for the BLC (back light compensa- [AE LEVEL] menu. tion). General Operation Select [BLC LEVEL] option on the [AE LEVEL] menu, 1. -
Page 25: Special Settings
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 25 User Title Setting Special Settings You can name the camera independently. You can set the special options using the [SPECIAL] 1. Move the cursor to [USER TITLE] on the menu. [SPECIAL] menu. Arrow mark appears. General Operation 2. -
Page 26: Color
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 26 Color Setting Digital Effect Setting You can switch the displayed picture to grayscale or You cannot set a Digital Effect option. color. Select [COLOR] option on the [SPECIAL] menu, then SPECIAL select an option (ON or OFF). Set to [ON] to display ■... -
Page 27: Motion Detection Setting
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 27 Motion Detection Setting Function On-Screen Display Setting The motion detection detects the moving objects in the scene by monitoring changes in brightness level. You can set the Function On-Screen Display options You can select the level of sensitivity for motion using the [F OSD] menu. -
Page 28: Privacy Masking Settings
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 28 AREA SEL: Selects a privacy masking area (1-8). Privacy Masking Settings MASKING: This function is available for MASKING This function is aiming at the protection of personal mode. privacy, selecting a screen part black not to be dis- P MODE SET: This function is available to go to the played in the screen. -
Page 29: Reference
LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 29 Reference Specifications Signal System NTSC (High Resolution) PAL (High Resolution) Pick-Up Device 1/4” EX-view HAD CCD Total Pixels No. 410K 470K S/N Ratio More Than 50 dB Horizontal Resolution More Than 520 TV Lines Lens X 27 Zoom (F 1.5(W), F 3.8(T) f=3.25-88.0 mm) Shooting Distance... - Page 30 LPT-OI553HQ_AA7ASLG_EMG 7/19/05 1:53 PM Page 30 P/NO : 3834RS0075H...