Epson PowerLite Home Cinema 1440 User Manual page 133

Power light Status light
Blue Flashing blue
Flashing blue Varies
Off Flashing blue
Lamp light Temp light
Off Off
Off Flashing
orange
Off Orange
133
Status and solution
Shutting down; when the Status
light stops flashing, you can unplug
the projector
Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Projector has overheated and
turned off; leave it turned off to cool
down for about five minutes, then do
the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug the
projector and contact Epson for
help