NEC PX803UL-WH User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. PX803UL-WH
  6. User manual

NEC PX803UL-WH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Projector
PX803UL-WH/PX803UL-BK
User's Manual
Model No.
NP-PX803UL-WH/NP-PX803UL-BK

Advertisement

Table of Contents
loading

Related Manuals for NEC PX803UL-WH

Summary of Contents for NEC PX803UL-WH

  • Page 1 Projector PX803UL-WH/PX803UL-BK User’s Manual Model No. NP-PX803UL-WH/NP-PX803UL-BK...
  • Page 2 (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 3: Important Information

    Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

  • Page 4: Important Safeguards

    Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference WARNING This is a Class A product.
  • Page 5 Important Information WARNING • Do not use any other object than the projector’s lens cover to cover the lens while the projector is on. Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat emitted from the light output.
  • Page 6 Important Information • Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire. - Do not use any power cord other than the one supplied with the projector. - Do not bend or tug the power cord excessively. - Do not place the power cord under the projector, or any heavy object.
  • Page 7 Important Information Precautions when installing or replacing the lens unit sold separately (LENS CALIBRATION) After installing or replacing the lens unit, press either the SHUTTER/CALIBRATION button on the main unit or the INFO/L-CALIB. button while pressing the CTL button on the remote control to carry out [LENS CALIBRATION]. (→ page 18, 118) By carrying out [LENS CALIBRATION], the adjustment range of the zoom, focus, and shift of the [LENS MEMORY] is calibrated.
  • Page 8 Important Information Applicable lens unit: NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL Horizontal angle H Lens Zoom Tele Wide NP16FL — 32.9 NP17ZL 15.5 21.7 NP18ZL 12.4 16.1 NP19ZL 12.7 NP20ZL NP21ZL NP31ZL 27.8 33.6 Vertical angle V Lens Zoom Tele Wide NP16FL — 22.0 NP17ZL 14.0 NP18ZL 10.2...
  • Page 9 Important Information • The caution label and the explanatory label s of the CLASS 3R LASER PRODUCTS are stuck on the below indicated positions. Label 1 Label 2 Label 3 Label 1 Label 3 Label 2...

  • Page 10: Label

    Important Information • Manufacturer's ID Label (For PX803UL-WH) (For PX803UL-BK) Position of the Manufacturer's ID Label viii...
  • Page 11 Important Information About Copyright of original projected pictures: Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the following func- tions may raise concern about the infringement of copyrights which are protected by copyright law.

  • Page 12: Power Management Function

    Important Information Health precautions to users viewing 3D images Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your 3D eyeglasses or your 3D compatible content such as Blu-ray Discs, video games, computer’s video files and the like. To avoid any adverse symptoms, heed the following: •...
  • Page 13 Important Information Clearance for Installing the Projector Allow ample clearance between the projector and its surroundings as shown below. The high temperature exhaust coming out of the device may be sucked into the device again. Avoid installing the projector in a place where air movement from the HVAC is directed at the projector. Heated air from the HVAC can be taken in by the projector’s intake vent.

  • Page 14: Table Of Contents

    Table of Contents Important Information .................... i 1. Introduction ......................1 ❶ What’s in the Box? ......................1 ❷ Introduction to the Projector ...................3 Congratulations on Your Purchase of the Projector ..........3 General ........................3 Light source · Brightness ..................3 Installation .........................3 Videos ........................4 Network ........................4 Energy-saving ......................4 About this user’s manual ...................5...
  • Page 15 Table of Contents ❹ Freezing a Picture ......................37 ❺ Magnifying a Picture .....................38 ❻ Changing LIGHT MODE/Checking Energy-Saving Effect Using LIGHT MODE [LIGHT MODE]......................39 Checking Energy-Saving Effect [CARBON METER] ..........41 ❼ Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE] ....42 ❽ Preventing the Unauthorized Use of the Projector [SECURITY] ........45 ❾...
  • Page 16 Table of Contents [3D SETTINGS] ....................100 Using the Lens Memory Function [LENS MEMORY] ..........101 ❻ Menu Descriptions & Functions [DISPLAY] ..............103 [PIP/PICTURE BY PICTURE] ................103 [GEOMETRIC CORRECTION] ................105 [EDGE BLENDING] ....................109 [MULTI SCREEN]....................110 ❼ Menu Descriptions & Functions [SETUP] ..............112 [MENU] .........................112 [INSTALLATION(1)] ....................114 [INSTALLATION(2)] ....................117...
  • Page 17 Table of Contents Names and Features of Bundled Software Programs ...........160 Download service ....................160 ❷ Installing Software Program ..................161 Installation for Windows software ................161 ❸ Operating the Projector Via the LAN (Virtual Remote Tool) ........164 Connect the projector to a LAN................165 ❹...

  • Page 18: Introduction

    For North America only Limited warranty For customers in Europe: You will find our current valid Guar- antee Policy on our Web Site: • Important Infomation NEC Projector CD-ROM www.nec-display-solutions.com (7N8N6631) User’s manual (PDF) and the • Quick Setup Guide (7N8N6641) utility software •...
  • Page 19 1. Introduction Attaching/Removing the Dust Cap To remove the dust cap from the projector, push the To attach the dust cap to the projector, locate the catch on tongue at the top left outward and pull the knob at the the lower end of the dust cap and place it into the open- center of the cap.

  • Page 20: ❷ Introduction To The Projector

    1. Introduction ❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This projector is one of the very best projectors available today. The projector enables you to project precise images up to 500 inches across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, Blu-ray player, or document camera.

  • Page 21: Videos

    Convenient utility software (User Supportware) provided as standard The three utility software stored in the enclosed NEC Projector CD-ROM (Virtual Remote Tool, PC Control Utility Pro 4 (for Windows ) and PC Control Utility Pro 5 (for Mac OS )) can be used.

  • Page 22: About This User's Manual

    1. Introduction About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview.

  • Page 23: ❸ Part Names Of The Projector

    1. Introduction ❸ Part Names of the Projector Front/Top The lens is sold separately. The description below is for when the NP18ZL lens is mounted. Indicator Panel Remote Sensor (→ page 8) (→ page 12) Remote Sensor (located on the Stacking Holder fixing front and the rear) section...

  • Page 24: Rear

    1. Introduction Rear Controls (→ page 8) AC IN terminal Connect the supplied Exhaust vent power cord’s three-pin Heated aiir is exhausted plug here, and plug the from here. other end into an active (→ page xi, 154) wall outlet. (→ page 14) Power Cord Stopper Built-in Security Slot ( (→...

  • Page 25: Controls/Indicator Panel

    1. Introduction Controls/Indicator Panel 10 11 13. SHUTTER/CALIBRATION Button (POWER) Button (→ page 36) (→ page 17, 34) 14. LIGHT Button 2. POWER Indicator (→ page 39) (→ page 17, 18, 34, 186) 15. LENS SHIFT/HOME POSITION Button 3. STATUS Indicator (→...

  • Page 26: Terminals Features

    1. Introduction Terminals Features 1. COMPUTER IN (Mini D-Sub 15 Pin) 12. REMOTE Terminal (Stereo Mini) (→ page 14, 143, 149, 184) Use this jack for wired remote control of the projector using a commercially available remote cable with ⌀3.5 2.

  • Page 27: ❹ Part Names Of The Remote Control

    1. Introduction ❹ Part Names of the Remote Control 1. Infrared Transmitter 21. AUTO ADJ. Button (→ page 12) (→ page 33) 2. Remote Jack 22, 23. COMPUTER 1/2 Button Connect a commercially available (→ page 20) remote cable here for wired opera- 24.

  • Page 28: Battery Installation

    1. Introduction Battery Installation 1. Press the catch and remove 2. Install new ones (AA). En- 3. Slip the cover back over the batteries until the battery cover. sure that you have the bat- it snaps into place. teries’ polarity (+/−) aligned NOTE: Do not mix different types of batteries or new correctly.

  • Page 29: Operating Range For Wireless Remote Control

    1. Introduction Operating Range for Wireless Remote Control 30° 30° 15° 15° 30° 30° Remote sensor on projector cabinet Remote control 30° 30° 30° 30° 7 m/276 inch 7 m/276 inch • The infrared signal operates by line-of-sight up to a distance of above meters and within a 60-degree angle of the remote sensor on the projector cabinet.

  • Page 30: Projecting An Image (Basic Operation)

    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 14) Step 2 •...

  • Page 31: ❷ Connecting Your Computer/Connecting The Power Cord

    2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see “(2) Making Connections” on page 143. Connect the display output terminal (mini D-sub 15 pin) on the computer to the COMPUTER IN terminal on the projector with a commercially-available computer cable (with ferrite core) and then turn the knobs of the terminals to secure them.

  • Page 32: Using The Supplied Power Cords

    2. Projecting an Image (Basic Operation) CAUTION: Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation. Use caution when picking up the projector. Using the Supplied Power Cords Select the power cord suitable for your country or region.

  • Page 33: Using The Power Cord Stopper

    2. Projecting an Image (Basic Operation) Using the Power Cord Stopper To prevent the power cord from accidently removing from the AC IN of the projector, attach the power cord stopper to clamp the power cord. CAUTION • To prevent the power cord from coming loose, make sure that all the prongs of the power cord are fully inserted into the AC IN terminal of the projector before using the power cord stopper to fix the power cord.

  • Page 34: ❸ Turning On The Projector

    2. Projecting an Image (Basic Operation) ❸ Turning on the Projector NOTE: • The projector has two power switches: A main power switch and a POWER button (POWER ON and OFF on the remote control) • Turning on the projector: 1.

  • Page 35: Performing Lens Calibration

    2. Projecting an Image (Basic Operation) 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator goes from a steady red light to a flashing blue light, and the picture is projected on the screen.

  • Page 36: Note On Startup Screen (Menu Language Select Screen)

    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 29 menu languages. To select a menu language, follow these steps: 1.

  • Page 37: ❹ Selecting A Source

    2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button for 1 second or longer. The projector will search for the available input source and display it.
  • Page 38 2. Projecting an Image (Basic Operation) Selecting Default Source You can set a source as the default source so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2.

  • Page 39: ❺ Adjusting The Picture Size And Position

    2. Projecting an Image (Basic Operation) ❺ Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot, the zoom ring and the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the projected image’s vertical and horizontal Adjusting the focus position...

  • Page 40: Adjusting The Vertical Position Of A Projected Image (Lens Shift)

    2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION • Perform the adjustment from behind or from the side of the projector. Performing adjustment from the front could expose your eyes to strong light which could injure them. •...
  • Page 41 2. Projecting an Image (Basic Operation) 2. Press the ▼▲◀ or ▶ button. Use the ▼▲◀▶ buttons to move the projected image. • Returning the lens shift position to the home position Press and hold the LENS SHIFT/HOME POSITION button for 2 seconds to return the lens shift position to the home position (nearly center position)

  • Page 42: Adjusting With The Remote Control

    2. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Hold the CTL button and press the ECO/L-SHIFT button. The [LENS SHIFT] screen will be displayed. 2. Press the ▼▲◀ or ▶ button. Use the ▼▲◀▶ buttons to move the projected image. NOTE: Lens Calibration If the power of the projector is wrongly shut down during the motion of lens shift, it may shift the home position of the lens and...

  • Page 43: Focus

    2. Projecting an Image (Basic Operation) Focus Applicable lens unit: NP16FL/NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL 1. Press the FOCUS +/− button. • On the remote control, while pressing on the CTL button, press on VOL/FOCUS (+) or (−) button. The focus is adjusted. TIP: To obtain the best focus, perform the following (for permanent installation) Preparation: Warm up the projector for one hour.
  • Page 44 2. Projecting an Image (Basic Operation) Applicable lens unit: NP31ZL 1. Focus on the projected image around the optical axis. (Powered focus) The drawing below shows an example when the projected image is shifted upward. In this case the optical axis is at the bottom edge of the projected image.
  • Page 45 2. Projecting an Image (Basic Operation) 2. Adjust the focus at the edges of the projected image. (Manual focus) Turn the edge focus ring clockwise or counterclockwise. Optical axis This completes adjusting the projected image’s overall focus. NOTE: The NP31ZL supports the Lens Memory function, which allows you to store adjusted value for Lens Shift, Zoom, and Focus. If you accidentally move the Edge focus ring (drawing shown below) after having stored adjusted values, the adjusted values stored in the Lens Memory will not be correctly applied.
  • Page 46 2. Projecting an Image (Basic Operation) TIP: To obtain the best focus, perform the following (for permanent installation) Preparation: Warm up the projector for one hour. 1. Press the FOCUS +/− buttons to check the adjustable focus range. For checking it by the remote control, press and hold the CTL button and press VOL./FOCUS +/−...
  • Page 47 2. Projecting an Image (Basic Operation) 2. Adjust the focus at the edges of the projected image. Press either the ZOOM +/− button on the control panel or the D-ZOOM/ZOOM +/− button while holding to press the CTL button on the remote control. Focus around the optical axis set at step 1 is remained unchanged.

  • Page 48: Zoom

    2. Projecting an Image (Basic Operation) Zoom Applicable lens units: NP17ZL/NP18ZL/NP19ZL/NP20ZL/NP21ZL/NP31ZL 1. Press the ZOOM +/− button. • On the remote control, while pressing on the CTL button, press the D-ZOOM/ZOOM (+) or (−) button. The zoom is adjusted.

  • Page 49: Adjusting The Tilt Foot

    2. Projecting an Image (Basic Operation) Adjusting the Tilt Foot 1. The position to project image may be adjusted by the tilt foot positioned at four corners of the cabinet bottom. The tilt foot height can be adjusted by its turn. “To adjust the height of the projected image”...

  • Page 50: ❻ Optimizing Computer Signal Automatically

    2. Projecting an Image (Basic Operation) ❻ Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust When an image from HDMI IN, DisplayPort IN, BNC input terminal (analog RGB), COMPUTER IN, or HDBaseT is being projected, and the edge is cut off or the image quality is poor, this button can be used to automatically optimize the projection image on the screen.

  • Page 51: ❼ Turning Off The Projector

    2. Projecting an Image (Basic Operation) ❼ Turning off the Projector 1. Press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE ? / CARBON SAV- INGS- SESSION 0.000[g-CO2]] message will appear.

  • Page 52: ❽ After Use

    2. Projecting an Image (Basic Operation) NOTE: • Do not unplug the power cord from the projector or from the power outlet while an image is being projected. Doing so could deteriorate the projector’s AC IN terminal or the power plug’s contact. To turn off the AC power supply when the projector is powered on, use the projector’s main power switch, a power strip equipped with a switch, or a breaker.

  • Page 53: Convenient Features

    3. Convenient Features ❶ Turn off the light of the projector (LENS SHUTTER) Press the SHUTTER button. The light source will turn off temporarily. Press again to allow the screen to become illuminated again. • Another way to shut the light source off is to press the SHUTTER button on the remote control.

  • Page 54: ❹ Freezing A Picture

    3. Convenient Features ❹ Freezing a Picture Hold the CTL button and press the PIP/FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing ahead.

  • Page 55: ❺ Magnifying A Picture

    3. Convenient Features ❺ Magnifying a Picture You can magnify the picture up to four times. NOTE: • Depending on an input signal, the maximum magnification may be less than four times, or the function may be restricted. To do so: 1.

  • Page 56: ❻ Changing Light Mode/Checking Energy-Saving Effect Using Light Mode [Light Mode]

    3. Convenient Features ❻ Changing LIGHT MODE/Checking Energy-Saving Effect Using LIGHT MODE [LIGHT MODE] When either [ECO1] or [ECO2] in [LIGHT MODE] is selected, motion noise of the projector is cut down by lowering brightness of its light source. By saving energy consumption, the CO emission from this projector can be reduced.
  • Page 57 3. Convenient Features NOTE: • The [LIGHT MODE] can be changed by using the menu. Select [SETUP] → [INSTALLATION(1)] → [LIGHT MODE] → [LIGHT MODE]. • The light module hours used can be checked in [USAGE TIME] on the menu. Select [INFO.] → [USAGE TIME]. •...

  • Page 58: Checking Energy-Saving Effect [Carbon Meter]

    3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO emission reduction (kg) when the projector’s [LIGHT MODE] is set to either [ECO1] or [ECO2]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION].

  • Page 59: ❼ Correcting Horizontal And Vertical Keystone Distortion [Cornerstone]

    3. Convenient Features ❼ Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. 1.
  • Page 60 3. Convenient Features 5. Press the ▼ button to align with the [CORNERSTONE] and then press the ENTER button. The drawing shows the upper left icon ( ) is selected. The screen will switch to the [CORNERSTONE] screen. NOTE: • When a [GEOMETRIC CORRECTION] function other than [CORNERSTONE] has been set up, the [CORNERSTONE] screen will not be displayed.
  • Page 61 3. Convenient Features 13. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button. This completes the [CORNERSTONE] correction. • Returning to the [CORNERSTONE] screen, select [CANCEL] and press the ENTER button. NOTE: • Even if the installation angle is changed when the projector is turned on again, the correction values in the previous time has been maintained.

  • Page 62: ❽ Preventing The Unauthorized Use Of The Projector [Security]

    3. Convenient Features ❽ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro- jector cannot project an image.
  • Page 63 3. Convenient Features 7. Type your keyword in the same combination of ▲▼◀▶ buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1.
  • Page 64 3. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [CONTROL] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen will be displayed.

  • Page 65: ❾ Projecting 3D Videos

    3. Convenient Features ❾ Projecting 3D videos This projector supports DLP-Link glasses and 3D emitter. CAUTION Health precautions Before use, please make sure to read any health precautions that may be stated in the operating manuals enclosed with the 3D eyewear and 3D video software (Blu-ray player, games, computer animation files, etc.). Please take note of the following in order to avoid adverse health effects.
  • Page 66 3. Convenient Features The [3D SETTINGS] screen will be displayed. (4)Use the ▼ button to align the cursor with [FORMAT], then press ENTER. The [FORMAT] screen will be displayed. (5)Use the ▼/▲ buttons to align the cursor at one among format options, then press ENTER for setting it up. The display will return to the [FORMAT] screen.
  • Page 67 3. Convenient Features Using a 3D emitter This projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewear. In order to synchronize the 3D video and eyewear, a commercially-available 3D emitter needs to be connected to the projector (on the projector side).

  • Page 68: When Videos Cannot Be Viewed In 3D

    3. Convenient Features When videos cannot be viewed in 3D Please check the following points when videos cannot be viewed in 3D. Please also read the operating manual attached to the 3D eyewear. Possible reasons Solutions The selected signal does not support 3D output� Please change the video signal input to one that supports 3D�...

  • Page 69: ❿ Controlling The Projector By Using An Http Browser

    3. Convenient Features ❿ Controlling the Projector by Using an HTTP Browser Overview The HTTP Server function provides settings and operations for: 1. Setting for wired network (NETWORK SETTINGS) To use wired LAN connection, connect the projector to the computer with a commercially available LAN cable. (→ page 152) 2.

  • Page 70: Handling Of The Address For Operation Via A Browser

    IP address of the projector has been set in the “HOSTS” file of the computer being used. Example 1: When the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network setting by specifying http://pj.nec.co.jp/index.html...
  • Page 71 3. Convenient Features PICTURE: Controls the video adjustment of the projector. BRIGHTNESS ▲ ���� Increases the brightness adjustment value� BRIGHTNESS ▼ ���� Decreases the brightness adjustment value� CONTRAST ▲ �������� Increases the contrast adjustment value� CONTRAST ▼ �������� Decreases the contrast adjustment value� COLOR ▲...

  • Page 72: Network Settings

    3. Convenient Features NETWORK SETTINGS • SETTINGS WIRED SETTING Set for wired LAN. APPLY Apply your settings to wired LAN. PROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. DISABLE Turn off wired LAN connection DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP server.
  • Page 73 3. Convenient Features • NAME PROJECTOR NAME Enter a name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not be affected even when [RESET] is done from the menu. HOST NAME Enter the hostname of the network connected to the projector.
  • Page 74 3. Convenient Features • NETWORK SERVICE PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if you forget your password, consult with your dealer. HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less. When a password is set up, you will be prompted for your user name (arbitrary) and password during LOGON.

  • Page 75: ⓫ Storing Changes For Lens Shift, Zoom, And Focus [Lens Memory]

    3. Convenient Features ⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY] The adjusted values can be stored in projector memory when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens shift, focus, and zoom at the time of source selection.

  • Page 76: To Store Your Adjusted Values In [Ref. Lens Memory]

    3. Convenient Features To store your adjusted values in [REF. LENS MEMORY]: 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 4.
  • Page 77 3. Convenient Features The confirmation screen will be displayed. 8. Press the ◀ button to select and [YES] and press the ENTER button. Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it. • The [FORCED MUTE] setting stops projection during lens shift. (→ page 118) 9.

  • Page 78: To Call Up Your Adjusted Values From [Ref. Lens Memory]

    3. Convenient Features To call up your adjusted values from [REF. LENS MEMORY]: 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 4.
  • Page 79 3. Convenient Features The lens will shift based on the adjusted values stored in the selected [PROFILE]. 8. Press the ◀ button to select and [YES] and press the ENTER button. The adjusted values will be applied to the current signal. . 9.
  • Page 80 3. Convenient Features TIP: To call up the adjusted values from [LENS MEMORY]: 1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button. The confirmation screen will be displayed. 2. Press the ◀ button to select and [YES] and press the ENTER button. During projection, if the adjusted values for an input signal have been saved, the lens will shift.

  • Page 81: Multi-Screen Projection

    4. Multi-Screen Projection ❶ Things that can be done using multi-screen projection This projector can be used singly or arranged in multiple units for multi-screen projection. We will introduce an example using two projection screens here. Case 1 Using a single projector to project two types of videos at the same time [PIP/PICTURE BY PICTURE] Case 2 Using four projectors (resolution: WUXGA) to project video with a resolution of 2560 ×...

  • Page 82: Case 2. Using Four Projectors (Resolution: Wuxga) To Project Videos With A Resolution Of 2560 × 1600 Pixels [Tiling]

    4. Multi-Screen Projection Case 2. Using four projectors (resolution: WUXGA) to project videos with a resolution of 2560 × 1600 pixels [TILING] Connection example and projection image On-screen menu operations 1 Four similar videos are displayed when four projectors are projected. Please request the dealer to adjust the projection position of each projector.
  • Page 83 4. Multi-Screen Projection 2 Operate the on-screen menu using the four respective projectors to divide the image into four portions. Display [DISPLAY] → [MULTI SCREEN] → [PICTURE SETTING] Screen in the on-screen menu and select [TIL- ING]. (1)In the screen for setting the number of horizontal units, select [2 UNITS]. (number of units in the horizontal direc- tion) (2)In the screen for setting the number of vertical units, select [2 UNITS].

  • Page 84: Things To Note When Installing Projectors

    4. Multi-Screen Projection Things to note when installing projectors • Leave 30 cm or over space between each projectors and between the intake vent and the wall for installing projec- tors side by side, so that air intake of the projectors are not obstructed. When the air intake and discharge outlet are obstructed, the temperature inside the projector will rise and this may result in a malfunction.

  • Page 85: ❷ Displaying Two Pictures At The Same Time

    4. Multi-Screen Projection ❷ Displaying Two Pictures at the Same Time The projector has a feature that allows you to view two different signals simultaneously. You have two modes: picture in picture (PIP) mode and picture by picture (PICTURE BY PICTURE) mode. The projection video in the first screen display is known as the main display while the projection video that is called out subsequently is known as the sub-display.

  • Page 86: Projecting Two Screens

    4. Multi-Screen Projection Projecting two screens 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button. This displays the [SUB INPUT] screen.

  • Page 87: Switching The Main Display With The Sub-Display And Vice Versa

    4. Multi-Screen Projection Switching the main display with the sub-display and vice versa 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PICTURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2.

  • Page 88: Restrictions

    4. Multi-Screen Projection Restrictions • The following operations are enabled only for the main display. • Visual adjustments • Video magnification / demaginification using the partial D-ZOOM/ZOOM +/− buttons. However, magnification / demaginification is up to the boundary set in [PICTURE BY PICTURE]. •...

  • Page 89: ❸ Displaying A Picture Using [Edge Blending]

    4. Multi-Screen Projection ❸ Displaying a Picture Using [EDGE BLENDING] A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and bottom. This projector is equipped with an “EDGE BLENDING Function” that makes the edges (boundaries) of the projection screen indistinguishable.

  • Page 90: Setting The Overlap Of Projection Screens

    4. Multi-Screen Projection Preparation: • Turn on the projector and display a signal. • When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activate the other projectors. (→ page 125) Setting the overlap of projection screens ①...
  • Page 91 4. Multi-Screen Projection 5. Select [CONTROL] → [ON] and press the ENTER button. Each [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] has its own [CONTROL], [MARKER], [RANGE], and [POSITION]. • For Projector A, set the [CONTROL] for the [TOP], [LEFT] and[BOTTOM] to [OFF]. Similarly for Projector B, set the [CONTROL] for the [TOP], [RIGHT] and [BOTTOM] to [OFF].
  • Page 92 4. Multi-Screen Projection 1 Adjust [RANGE]. Use the ◀ or ▶ button to adjust the overlapped area. TIP: • Adjust to overlap one projector’ marker with the other projector’s marker. 2 Adjust [POSITION]. Use the ◀ or ▶ button to align one edge with the other edge of overlapped images. TIP: •...

  • Page 93: Black Level Adjustment

    4. Multi-Screen Projection Black Level Adjustment This adjusts the black level of the overlapping area and the non-overlapping area of the multi-screen (EDGE BLENDING). Adjust the brightness level if you feel the difference is too large. NOTE: This function is enabled only when [MODE] is turned on. Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.

  • Page 94: Segmented Portions For Black Level Adjustment

    4. Multi-Screen Projection 9-segmented portions for Black Level adjustment The center projector This function adjusts the brightness level of 9-segmented portions for the center projector and 4-segmented portions for the left bottom projector as shown below. TOP-CENTER TOP-LEFT TOP-RIGHT CENTER- LEFT CENTER-RIGHT CENTER...

  • Page 95: Using On-Screen Menu

    5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly depending on input signal and the projector setting. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶...

  • Page 96: ❷ Menu Elements

    5. Using On-Screen Menu ❷ Menu Elements Slide bar Solid triangle Available buttons Source Menu mode Highlight Radio button LIGHT MODE symbol Off Timer remaining HIGH symbol time Thermometer symbol Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item�...

  • Page 97: ❸ List Of Menu Items

    5. Using On-Screen Menu ❸ List of Menu Items • Basic menu items are indicated by shaded area. Some menu items are not available depending on the input source. Menu Item Default Options HDMI DisplayPort BNC(CV) BNC(Y/C) INPUT COMPUTER HDBaseT SLOT ENTRY LIST TEST PATTERN...
  • Page 98 5. Using On-Screen Menu Menu Item Default Options RANDOM NR OFF, LOW, MEDIUM, HIGH NOISE REDUCTION MOSQUITO NR OFF, LOW, MEDIUM, HIGH BLOCK NR OFF, LOW DEINTERLACE NORMAL NORMAL, MOVIE, STILL VIDEO CONTRAST MODE AUTO OFF, AUTO, NORMAL ENHANCEMENT GAIN SIGNAL TYPE AUTO AUTO, RGB, COMPONENT...
  • Page 99 5. Using On-Screen Menu Menu Item Default Options MODE OFF, ON CONTRAST W CONTRAST R CONTRAST G WHITE BALANCE CONTRAST B BRIGHTNESS W BRIGHTNESS R BRIGHTNESS G BRIGHTNESS B MULTI DISPLAY SCREEN MODE OFF, ZOOM, TILING HORIZONTAL ZOOM VERTICAL ZOOM ZOOM HORIZONTAL POSITION PICTURE SETTING...
  • Page 100 5. Using On-Screen Menu Menu Item Default Options MENU MODE ADVANCED ADVANCED, BASIC NOT SAVE SETTING VALUES OFF, ON ADMINISTRA- TOR MODE NEW PASSWORD CONFIRM PASSWORD ENABLE OFF, ON ACTIVE OFF, ON SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY TIME FUNCTION POWER, INPUT, LIGHT MODE...
  • Page 101 5. Using On-Screen Menu Menu Item Default Options PROFILES DISABLE, PROFILE 1, PROFILE 2 DHCP OFF, ON IP ADDRESS 192�168�0�10 SUBNET MASK 255�255�255�0 WIRED LAN GATEWAY 192�168�0�1 AUTO DNS OFF, ON DNS CONFIGURATION RECONNECT PROJECTOR NAME PROJECTOR NAME PX803UL Series HOST NAME necpj DOMAIN...
  • Page 102 5. Using On-Screen Menu Menu Item Default Options LIGHT HOURS USED USAGE TIME TOTAL CARBON SAVINGS INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SOURCE(1) SYNC TYPE SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO� SIGNAL TYPE VIDEO TYPE BIT DEPTH SOURCE(2) VIDEO LEVEL LINK RATE...

  • Page 103: ❹ Menu Descriptions & Functions [Input]

    5. Using On-Screen Menu ❹ Menu Descriptions & Functions [INPUT] HDMI This projects the video of the device connected to the HDMI IN terminal. DisplayPort This projects the video of the device connected to the Display Port IN terminal. This projects the video of the device connected to the video input terminal. (This projects the analog RGB signal or component signal.) BNC(CV) This projects the video of the device connected to the BNC (CV) video input terminal.
  • Page 104 5. Using On-Screen Menu Using the Entry List When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust- ment values of) registered signals can be loaded from the Entry List whenever necessary. Up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, an error message is then displayed and no additional patterns can be registered.
  • Page 105 5. Using On-Screen Menu Entering the currently projected signal into the Entry List [STORE] 1. Press the ▲ or ▼ button to select any number. 2. Press the ◀ or ▶ button to select [STORE] and press the ENTER button. Calling up a signal from the Entry List [LOAD] Press the ▲...
  • Page 106 5. Using On-Screen Menu Cutting a signal from the Entry List [CUT] 1. Press the ▲ or ▼ button to select a signal you wish to delete. 2. Press the ◀, ▶, ▲, or ▼ button to select [CUT] and press the ENTER button. The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom of the Entry List.

  • Page 107: ❺ Menu Descriptions & Functions [Adjust]

    5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [MODE] This function allows you to determine how to save settings for [DETAIL SETTINGS] of [PRESET] for each input. STANDARD ������������ Saves settings for each item of [PRESET] (Preset 1 through 8) PROFESSIONAL �����...

  • Page 108: Detail Settings

    5. Using On-Screen Menu [DETAIL SETTINGS] [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 8]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT ��������...

  • Page 109: Brilliant Color

    5. Using On-Screen Menu Selecting Screen Size for DICOM SIM [SCREEN SIZE] This function will perform gamma correction appropriate for the screen size. LARGE ������������������� For screen size of 150" MEDIUM ���������������� For screen size of 100" SMALL ������������������� For screen size of 50" NOTE: •...
  • Page 110 5. Using On-Screen Menu MAGENTA + Direction Blue direction − Direction Red direction SATURATION + Direction Vivid − Direction Weak CYAN + Direction Green direction − Direction Blue direction SATURATION + Direction Vivid − Direction Weak [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity.

  • Page 111: [Image Options]

    5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal banding in the image�...
  • Page 112 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. • An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. • The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal.
  • Page 113 5. Using On-Screen Menu Selecting the Aspect Ratio [ASPECT RATIO] Use this function to select the screen’s vertical:horizontal aspect ratio. Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) in the [INSTALLATION(1)] before setting the aspect ratio. (→ page 115) The projector automatically identifies the signal being input and sets the optimum aspect ratio.

  • Page 114: Input Resolution

    5. Using On-Screen Menu Options Function NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower or higher resolution than the projector’s native resolution. (→ page 3) When the incoming computer signal has a higher resolution than the projector's native resolution, the center of an image will be displayed.

  • Page 115: [Video]

    5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] When projecting a video image, you can use the [NOISE REDUCTION] function to reduce the screen noise (roughness and distortion). This device is equipped with three types of noise reduction functions. Select the function according to the type of noise.

  • Page 116: Signal Type

    5. Using On-Screen Menu [SIGNAL TYPE] Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting if the color of the image remains unnatural. AUTO ��������������������� Automatically distinguishes RGB and component signals� RGB ����������������������� Switches to the RGB input� COMPONENT ���������...

  • Page 117: [3D Settings]

    5. Using On-Screen Menu [3D SETTINGS] Please refer to “3-9 Projecting 3D videos” (→ page 48) for the operation. FORMAT Select the 3D video format (recording / transmission format). Select to match the 3D broadcast and 3D media. Nor- mally, [AUTO] is selected. Please select the 3D input signal format when the 3D detection signal of the format cannot be distinguished.

  • Page 118: Using The Lens Memory Function [Lens Memory]

    5. Using On-Screen Menu Using the Lens Memory Function [LENS MEMORY] This function serves to store the adjusted values for each input signal when using the LENS SHIFT, ZOOM and FO- CUS buttons of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens shift, focus, and zoom at the time of source selection.
  • Page 119 5. Using On-Screen Menu To call up the adjusted values from [LENS MEMORY]: 1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button. The confirmation screen will be displayed. 2. Press the ◀ button to select and [YES] and press the ENTER button. During projection, if the adjusted values for an input signal have been saved, the lens will shift.

  • Page 120: ❻ Menu Descriptions & Functions [Display]

    5. Using On-Screen Menu ❻ Menu Descriptions & Functions [DISPLAY] [PIP/PICTURE BY PICTURE] SUB INPUT Select the input signal to be displayed in the sub-display. Please refer to “4-2 Displaying Two Pictures at the Same Time” (→ page 68) for details on the operation. MODE Select either PIP or PICTURE BY PICTURE when switching to 2-screen display.
  • Page 121 5. Using On-Screen Menu TIP: The horizontal position and vertical position are the amount of movement from the reference points. For example, when TOP-LEFT is adjusted, the position is displayed with the same amount of movement even if displayed with other starting positions. The maximum amount of movement is half the resolution of the projector.

  • Page 122: [Geometric Correction]

    5. Using On-Screen Menu [GEOMETRIC CORRECTION] KEYSTONE Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen. To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the 3D REFORM button on the remote control.
  • Page 123 5. Using On-Screen Menu CORNERSTONE Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen. Please refer to “Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]” (→ page 42) for details on the operation. HORIZONTAL CORNER/VERTICAL CORNER Distortion correction for corner projection such as wall surfaces.
  • Page 124 5. Using On-Screen Menu Adjustment method 1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORREC- TION] menu and then press the ENTER button. • The adjustment screen will be displayed. 2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button.
  • Page 125 5. Using On-Screen Menu PINCUSHION Adjust the curve distortion of the projection screen. TOP ������������������������ Adjust the curve distortion of the upper edge of the projection screen� BOTTOM ���������������� Adjust the curve distortion of the lower edge of the projection screen�...

  • Page 126: [Edge Blending]

    5. Using On-Screen Menu [EDGE BLENDING] This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combina- tion of several projectors in the up, down, left and right positions. MODE This enables or disables the EDGE BLENDING function. When MODE is set to ON, the TOP, BOTTOM, LEFT, RIGHT and BLACK LEVEL settings can be adjusted.

  • Page 127: [Multi Screen]

    5. Using On-Screen Menu [MULTI SCREEN] WHITE BALANCE This adjusts the white balance for each projector when projecting using a combination of several projectors. This can be adjusted when [MODE] is set to [ON]. BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B ������������������������������...
  • Page 128 5. Using On-Screen Menu Conditions for using tiling • All the projectors need to fulfil the following conditions. • The panel size must be the same • The projection screen size must be the same • The left and right ends or top and bottom ends of the projection screen must be consistent. •...

  • Page 129: ❼ Menu Descriptions & Functions [Setup]

    5. Using On-Screen Menu ❼ Menu Descriptions & Functions [SETUP] [MENU] Selecting Menu Language [LANGUAGE] You can choose one of 29 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME.
  • Page 130 5. Using On-Screen Menu [3D CAUTION MESSAGE] This selects whether to display a caution message or not when switching to a 3D video. The default condition when shipped from the factory is ON. OFF ������������������������ The 3D caution message screen will not be displayed� ON �������������������������...

  • Page 131: [Installation(1)]

    5. Using On-Screen Menu [INSTALLATION(1)] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. NOTE: • Please consult the dealer if you require special installation services e.g. when mounting the projector to a ceiling. Never install the projector on your own.
  • Page 132 5. Using On-Screen Menu Selecting Aspect Ratio and Position for Screen [SCREEN TYPE] Screen type Sets the aspect ratio of the projection screen. FREE The ratio of the liquid crystal panel is selected. Select this when projecting multi-screen and 17:9 screen (2K). 4:3 screen For a screen with a 4:3 aspect ratio 16:9 screen...

  • Page 133: Light Mode

    5. Using On-Screen Menu [LIGHT MODE] Adjusting the energy savings settings and the brightness of each projector in multi-screen projection. For energy savings settings, see page “3-6. Changing LIGHT MODE/Checking Energy-Saving Effect Using LIGHT MODE [LIGHT MODE]”. LIGHT MODE NORMAL The light module luminance (brightness) will become 100% and the screen will turn bright.

  • Page 134: [Installation(2)]

    5. Using On-Screen Menu [INSTALLATION(2)] [SHUTTER SETTINGS] Enabling and disabling the lens shutter function.You can also set how long the light will take to fade in and fade out when either the SHUTTER button on the remote control or the SHUTTER/CALIBRATION button on the cabinet is pressed. POWER ON OPEN When the power is turned on, the light source comes on and the picture is...

  • Page 135: Lens Calibration

    5. Using On-Screen Menu Using the Reference Lens Memory Function [REF. LENS MEMORY] This function serves to store the adjusted values common to all input sources when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector or the remote control. The adjusted values stored in memory can be used as a reference to the current.

  • Page 136: [Control]

    5. Using On-Screen Menu [CONTROL] TOOLS ADMINISTRATOR MODE This allows you to select MENU MODE, save settings, and set a password for the administrator mode. MENU MODE Select either [BASIC] or [ADVANCED] menu. — (→ page 80) Placing a check mark will not save your projector settings� NOT SAVE SETTING —...
  • Page 137 5. Using On-Screen Menu PROGRAM TIMER This option turns on/standby the projector and changes video signals, and selects LIGHT mode automatically at a specified time. NOTE: • Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (→ page 123) Make sure that the projector is in the standby condition with the POWER cord connected.
  • Page 138 5. Using On-Screen Menu TIME ���������������������� Set the time to execute the program� Enter time in 24-hour format� FUNCTION ������������� Select a function to be executed� Selecting [POWER] will allow you to turn on or off the projector by setting [ADVANCED SETTINGS]�...
  • Page 139 5. Using On-Screen Menu Activating the program timer 1. Select [ENABLE] on the [PROGRAM TIMER] screen and press the ENTER button. The selection screen will be displayed. 2. Press the ▼ button to align the cursor with [ON] and then press the ENTER button. Return to the [PROGRAM TIMER] screen.

  • Page 140: Date And Time Settings

    5. Using On-Screen Menu DATE AND TIME SETTINGS You can set the current time, month, date, and year. NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the main power is off for 2 weeks or more, the built-in clock will cease.
  • Page 141 5. Using On-Screen Menu Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • How to cancel the [CONTROL PANEL LOCK] When the [CONTROL PANEL LOCK] is set to [ON], press the SOURCE button on the main body for about 10 seconds to cancel the [CONTROL PANEL LOCK].
  • Page 142 5. Using On-Screen Menu Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control.
  • Page 143 5. Using On-Screen Menu Turning On or Off Remote Sensor [REMOTE SENSOR] This option determines which remote sensor on the projector is enabled in wireless mode. The options are: FRONT/BACK, FRONT, BACK, and HDBaseT. NOTE: • The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT supported transmission device connected to the projector on which “HDBaseT”...

  • Page 144: [Network Settings]

    5. Using On-Screen Menu [NETWORK SETTINGS] Important: • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page 152) TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
  • Page 145 5. Using On-Screen Menu WIRED LAN PROFILES • The settings for using the built-in Ethernet/HDBaseT port in the — projector can be recorded in the projector memory in two ways. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
  • Page 146 5. Using On-Screen Menu PROJECTOR NAME PROJECTOR NAME Set a unique projector name. Up to 16 alphanu- meric characters and symbols DOMAIN Set a host name and domain name of the projector. HOST NAME Set a host name of the projector. Up to 15 alphanumeric characters DOMAIN NAME...
  • Page 147 5. Using On-Screen Menu ALERT MAIL ALERT MAIL This option will notify your computer of error messages via e-mail — when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature� Clearing a checkmark will turn off the Alert Mail feature� Sample of a message to be sent from the projector: Subject: [Projector] Projector Information THE COOLING FAN HAS STOPPED.
  • Page 148 5. Using On-Screen Menu NETWORK SERVICE HTTP SERVER Set a password for your HTTP server. Up to 10 alphanumeric characters PJLink This option allows you to set a password when you use the Up to 32 alphanumeric PJLink feature. characters NOTE: •...

  • Page 149: [Source Options]

    5. Using On-Screen Menu [SOURCE OPTIONS] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ������������������������...
  • Page 150 5. Using On-Screen Menu Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. The subtitles and text will be displayed a short while after the on-screen menu disappears. OFF ������������������������...

  • Page 151: [Power Options]

    5. Using On-Screen Menu [POWER OPTIONS] Selecting Power-saving in [STANDBY MODE] Setting the power consumption in the standby mode. NORMAL ���������������� In the standby mode, the power consumption of the projector is 0�5 W� In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off� •...
  • Page 152 5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON SELECT] If set to [NETWORK STANDBY], the projector automatically detects the synchronizing signal input from the following selected terminals and projects the picture accordingly: Computer, HDMI, DisplayPort, HDBaseT, and SLOT. OFF ������������������������...

  • Page 153: Returning To Factory Default [Reset]

    5. Using On-Screen Menu Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS- PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].

  • Page 154: ❽ Menu Descriptions & Functions [Info.]

    5. Using On-Screen Menu ❽ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and light module usage. This item has nine pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LIGHT HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2)

  • Page 155: [Source(2)]

    5. Using On-Screen Menu [SOURCE(2)] SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL LINK RATE LINK LANE 3D FORMAT [SOURCE(3)] INPUT TERMINAL RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SYNC POLARITY SCAN TYPE SOURCE NAME ENTRY NO. [SOURCE(4)] SIGNAL TYPE VIDEO TYPE BIT DEPTH VIDEO LEVEL...

  • Page 156: [Wired Lan]

    5. Using On-Screen Menu [WIRED LAN] IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS [VERSION(1)] FIRMWARE DATA SUB-CPU [OTHERS] DATE TIME PROJECTOR NAME MODEL NO. SERIAL NUMBER CONTROL ID (when [CONTROL ID] is set)

  • Page 157: [Hdbaset]

    5. Using On-Screen Menu [HDBaseT] SIGNAL QUALITY OPERATION MODE LINK STATUS HDMI STATUS...

  • Page 158: Connecting To Other Equipment

    6. Connecting to Other Equipment ❶ Mounting a lens (sold separately) This projector can be used with 8 kinds of optional lenses (sold separately). The descriptions here are for the NP18ZL (standard zoom) lens. Mount other lenses in the same manner. See page for lens options.

  • Page 159: Removing The Lens

    6. Installation and Connections 4. Turn the lens unit rightward until click is heard. The lens is now fastened onto the projector. TIP: Mounting the lens theft prevention screw Fasten the lens theft prevention screw included with the projector to the bottom of the projector so that the lens cannot be removed easily.

  • Page 160: ❷ Making Connections

    6. Installation and Connections ❷ Making Connections A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. Analog RGB signal connection •...

  • Page 161: Digital Rgb Signal Connection

    6. Installation and Connections Digital RGB signal connection • Connect a commercially available HDMI cable between the computer’s HDMI output terminal and the projector’s HDMI IN terminal. • Connect a commercially available DisplayPort cable between the computer’s DisplayPort output terminal and the projector’s DisplayPort IN terminal.

  • Page 162: Installation And Connections

    6. Installation and Connections Cautions when connecting an HDMI cable • Use a certified High Speed HDMI Cable or High Speed HDMI Cable with Ethernet. ® ® Cautions when connecting a DisplayPort cable • Use a certified DisplayPort cable. • Depending on the computer, some time may be required until the image is displayed.
  • Page 163 6. Installation and Connections Cautions when using a DVI signal • When the computer has a DVI output terminal, use a commercially available converter cable to connect the com- puter to the projector’s HDMI IN terminal (only digital video signals can be input). HDMI IN NOTE: When Viewing a DVI Digital Signal •...

  • Page 164: Connecting An External Monitor

    6. Installation and Connections Connecting an External Monitor HDMI OUT HDMI cable (not supplied) HDMI IN Computer cable (VGA) (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. •...

  • Page 165: Connecting Your Blu-Ray Player Or Other Av Equipment

    6. Installation and Connections Connecting Your Blu-ray Player or Other AV Equipment Component video signal/S-video signal connection BNC （Y） BNC （C） BNC （CV） BNC cable (not supplied) Audio equipment • Select the source name for its appropriate input terminal after turning on the projector. SOURCE button on the projector Input terminal Button on the remote control...

  • Page 166: Connecting Component Input

    6. Installation and Connections Connecting Component Input COMPUTER IN 15-pin - to - RCA (female) × 3 BNC (male) - to - RCA (male) conversion cable adapter (ADP-CV1E) cable × 3 (sold commercially) Component video RCA × 3 cable (not supplied) Blu-ray player Audio Equipment •...

  • Page 167: Connecting Hdmi Input

    6. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your Blu-ray player, hard disk player, or notebook type PC to the HDMI IN terminal of your projector. HDMI IN HDMI cable (not supplied) Use High Speed HDMI Cable.

  • Page 168: Connecting A Document Camera

    6. Installation and Connections Connecting a document camera You can connect a document camera and project printed documents, etc. COMPUTER IN NOTE: • Name, position, and direction of ter- minals are vary depending on camera model. Please check user’s manual of your camera for details.

  • Page 169: Connecting To A Wired Lan

    6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a Ethernet/HDBaseT port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [NETWORK SETTINGS] →...

  • Page 170: Connecting To A Hdbaset Transmission Device (Sold Commercially)

    6. Installation and Connections Connecting to a HDBaseT transmission device (sold commercially) HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance. Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseT transmission device sold commercially.

  • Page 171: Portrait Projection (Vertical Orientation)

    6. Installation and Connections Portrait projection (vertical orientation) This projector can be installed vertically to display computer images in portrait orientation. Precautions during installation • Please do not install the projector in a vertical orientation on top of the floor or table on its own. If not, the pro- jector may fall over, resulting in injury, damage or malfunction.
  • Page 172 6. Installation and Connections Design and manufacturing conditions for the stand Please hire an installation service provider (for a fee) for the design and manufacture of a customized stand to be used for portrait projection. Please ensure that the design complies with the following conditions: •...

  • Page 173: Stacking Projectors

    6. Installation and Connections Stacking projectors The projected image brightness can be doubled by gravity stacking up to two projectors without external support. This is called “Stacking Projection”. 2 projectors can be stacked on top of each other for “Stacking” setup. CAUTION: A minimum of two persons are required to carry the projector.
  • Page 174 6. Installation and Connections Attaching Stacking Holders Attach three stacking holders to three locations on the top of the lower projector. Preparation: Tools required are Phillips screwdriver (plus-head) and four stacking holders packaged with the projector. Loosen the tilt foot (four locations) of the projector. 1.
  • Page 175 6. Installation and Connections 3. Put another projector on the first projector. Put each tilt foot of the upper projector on the stacking holders (four locations). • Each tilt foot has a rubber. Place each tilt foot rubber on stacking holders (four locations). Foot rubber TIP: •...

  • Page 176: Maintenance

    7. Maintenance ❶ Cleaning the Lens • Turn off the projector before cleaning. • Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens. WARNING • Please do not use a spray containing flammable gas to remove dust attached to the lens, etc. Doing so may result in fires.

  • Page 177: User Supportware

    • To connect the projector to the network by using the Virtual Remote Tool, PC Control Utility Pro 4, PC Control Utility Pro 5, please configure the settings of [SETUP] → [NETWORK SETTINGS] in the on-screen menu (→ page 127). Download service For the update information about these software programs and their operating environment, visit our website: URL: http://www.nec-display.com/dl/en/index.html...

  • Page 178: ❷ Installing Software Program

    XP Professional, “Microsoft .NET Framework Version 2.0” is required. The Microsoft .NET Framework Version 2.0, 3.0 or 3.5 is available from Microsoft’s web page. Download and install it on your computer. 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive. The menu window will be displayed.
  • Page 179 8. User Supportware 2 Click a software program you wish to install on the menu window. The installation will start. • Follow the instructions on the installer screens to complete the installation. TIP: Uninstalling a Software Program Preparation: Exit the software program before uninstalling. To uninstall the software program, the Windows user account must have “Administrator”...
  • Page 180 1. Put the “PC Control Utility Pro 5” folder to the Trash icon. 2. Put the configuration file of PC Control Utility Pro 5 to the Trash icon. • The configuration file of PC Control Utility Pro 5 is located in “/Users/<your user name>/Application Data/NEC Projector User Supportware/PC Control Utility Pro 5”.

  • Page 181: ❸ Operating The Projector Via The Lan (Virtual Remote Tool)

    • Logo data (image) sent using the Virtual Remote Tool will be displayed in the center with the surrounding area in black. • To put the default “NEC logo” back in the background logo, you need to register it as the background logo by using the image file...

  • Page 182: Connect The Projector To A Lan

    Windows Desktop. Start from the Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed.
  • Page 183 The Help screen will be displayed. • Displaying the help file using the Start Menu. 1. Click “Start”.“All programs” or “Programs”.“NEC Projector User Supportware”.“Virtual Remote Tool”. and then “Virtual Remote Tool Help” in this order. The Help screen will be displayed.

  • Page 184: ❹ Controlling The Projector Over A Lan (Pc Control Utility Pro 4/Pro 5)

    ❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/ Pro 5) Using the utility software “PC Control Utility Pro 4” or “PC Control Utility Pro 5” included on the companion NEC Pro- jector CD-ROM, the projector can be controlled from a computer over a LAN.
  • Page 185 8. User Supportware TIP: If the menu window will not be displayed, try the following procedure. For Windows 7: 1. Click “start” on Windows. 2. Click “All Programs” → “Accessories” → “Run”. 3. Type your CD-ROM drive name (example: “Q:\”) and “LAUNCHER.EXE” in “Name”. (example: Q:\ LAUNCHER.EXE) 4.
  • Page 186 Controlling the Projector by Using an HTTP Browser” (→ page 52) Step 3: Start PC Control Utility Pro 4 Click “Start” → “All programs” or “Programs” → “NEC Projector User Supportware” → “PC Control Utility Pro 4” → “PC Control Utility Pro 4”.
  • Page 187 Using on Mac OS Step 1: Install PC Control Utility Pro 5 on the computer 1. Insert the accompanying NEC Projector CD-ROM in your Mac CD-ROM drive. The CD-ROM icon will be displayed on the desktop. 2. Double-click the CD-ROM icon.

  • Page 188: Appendix

    9. Appendix ❶ Throw distance and screen size This projector can be used with 8 kinds of optional lenses (sold separately). Refer to the information on this page and use a lens suited for the installation environment (screen size and throw distance). For instructions on mounting the lens, see page 141.
  • Page 189 9. Appendix Projection range for the different lenses NP16FL : 0.8–5.1 m 40-500" 50-300" 50-300" 50-300" 50-300" 50-300" 50-300" NP31ZL: 0.6–10.4 m NP17ZL: 1.3–11.7 m NP18ZL: 1.8–14.9 m NP19ZL: 2.4–24.1 m NP20ZL: 3.8–35.4 m NP21ZL: 5.6–54.8 m Applicable lens unit: NP39ML Screen top end Throw Screen size...

  • Page 190: Tables Of Screen Sizes And Dimensions

    9. Appendix Tables of screen sizes and dimensions Size (inches) Screen width Screen height (inches) (cm) (inches) (cm) Screen 16:10 screen size 33.9 86.2 21.2 53.8 height (diagonal) 50.9 129.2 31.8 80.8 67.8 172.3 42.4 107.7 84.8 215.4 53.0 134.6 101.8 258.5 63.6...

  • Page 191: Lens Shifting Range

    9. Appendix Lens shifting range This projector is equipped with a lens shift function for adjusting the position of the projected image by using the LENS SHIFT buttons (→ page 23). The lens can be shifted within the range shown below. NOTE: •...

  • Page 192: ❷ Mounting The Optional Board (Sold Separately)

    9. Appendix ❷ Mounting the Optional Board (sold separately) CAUTION Before mounting or removing the optional board, be sure to turn off the projector, wait for the fans to stop and turn off the main power switch. Tool needed: Phillips screwdriver (plus-head) 1.
  • Page 193 9. Appendix 4. Tighten the two screws on both sides of the slot. • Be sure to tighten the screws. This will complete installation of the optional board. To select the optional board source, select SLOT as the input. NOTE: •...

  • Page 194: ❸ Compatible Input Signal List

    9. Appendix ❸ Compatible Input Signal List Analog Computer Signal Signal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz ) 640 × 480 4 : 3 60/72/75/85/iMac SVGA 800 × 600 4 : 3 56/60/72/75/85/iMac 1024 × 768 4 : 3 60/70/75/85/iMac XGA+...
  • Page 195 9. Appendix HDMI Signal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz ) 640 × 480 4 : 3 SVGA 800 × 600 4 : 3 1024 × 768 4 : 3 1280 × 720 16 : 9 1280 ×...
  • Page 196 9. Appendix DisplayPort Signal Resolution ( dots ) Aspect Ratio Refresh Rate ( Hz ) 640 × 480 4 : 3 SVGA 800 × 600 4 : 3 1024 × 768 4 : 3 1280 × 720 16 : 9 1280 ×...

  • Page 197: ❹ Specifications

    9. Appendix ❹ Specifications Model name PX803UL-WH/PX803UL-BK Method Single DLP chip ® Specifications of main parts DMD panel Size 0.67" (aspect ratio: 16:10) Pixels 2,304,000 (1920 dots × 1200 lines) (*1) Projection lenses Please refer to the specifications of option lens (→ page 182)
  • Page 198 9. Appendix Model name PX803UL-WH/PX803UL-BK Usage environment Operating temperature: 41 to 104°F (5 to 40°C) (*5) Operating humidity: 20 to 80% (with no condensation) Storage temperature: 14 to 140°F (-10 to 60°C) Storage humidity: 20 to 80% (with no condensation)
  • Page 199 9. Appendix Option lens (sold separately) NP16FL Power focus throw ratio 0.76:1, F1.85, f = 11.6 mm Image Size (Diagonal): 50–300 inches / 1.27–7.62 m Projection Distance (Min.–Max.): 0.81–5.08 m NP17ZL Power zoom and focus throw ratio 1.25–1.79:1, F1.85–2.5, f = 18.7–26.5 mm Image Size (Diagonal): 50–300 inches / 1.27–7.62 m Projection Distance (Min.–Max.): 1.33–11.74 m NP18ZL...

  • Page 200: Power Cord

    9. Appendix Power Cord If the supplied power cord cannot be used or in your area the voltage condition is different from the supplied power cord, use power cords that are suitable for the electrical specifications, types of power cords and regulations of the country of installation, as shown in the following table as shown below.

  • Page 201: ❺ Cabinet Dimensions

    9. Appendix ❺ Cabinet Dimensions Unit: mm (inch) Lens center 500 (19.7) 300 (11.8) 150 (5.9) 6-M4 × L16 (Max) for Ceiling Mount* * The screws specifications for Ceiling Mount: Screw type: M4 Screw hole dimension on the projector: M4 with the maximum depth 16 mm (0.63") CAUTION: Do not attempt to mount the projector on a ceiling yourself.

  • Page 202: ❻ Pin Assignments And Signal Names Of Main Terminals

    9. Appendix ❻ Pin assignments and signal names of main terminals COMPUTER IN/ Component Input Terminal (Mini D-Sub 15 Pin) Connection and signal level of each pin Pin No. RGB Signal (Analog) YCbCr Signal 11 12 13 14 15 Green or Sync on Green Blue Ground Signal Level...
  • Page 203 9. Appendix Ethernet/HDBaseT Port (RJ-45) Pin No. Signal TxD+/HDBT0+ 1 2 3 4 5 6 7 8 TxD−/HDBT0− RxD+/HDBT1+ Disconnection/HDBT2+ Disconnection/HDBT2− RxD−/HDBT1− Disconnection/HDBT3+ Disconnection/HDBT3− USB Port (Type A) Pin No. Signal D− Grounding PC CONTROL Port (D-Sub 9 Pin) Pin No. Signal Unused RxD reception data...

  • Page 204: ❼ Troubleshooting

    Red (once per Lens is not fixed on. Check fixing conditions of the lens. cycle) Red (four Fan problem The cooling fan has stopped turning. Contact an NEC times per projector customer support center for repairs. cycle) Orange Network conflict It is not possible to connect the projector’s built-in LAN...
  • Page 205 Red (six times The light source is not Wait for over 1 minute and try to power ON the projector per cycle) turned on. again. If the problem still persists, contact the NEC projector customer support center. Green Light module lit –...

  • Page 206: Common Problems & Solutions

    9. Appendix Common Problems & Solutions (→ “POWER/STATUS/LIGHT/TEMP. Indicator” on page 186, 187.) Problem Check These Items Does not turn on • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote or shut down control is on�...
  • Page 207 9. Appendix Problem Check These Items Cross color in RGB • Press the AUTO ADJ. button on the projector cabinet or the remote control. (→ page 33) mode • Adjust the computer image manually with [CLOCK]/[PHASE] in [IMAGE OPTIONS] in the menu. (→ page For more information contact your dealer.

  • Page 208: If There Is No Picture, Or The Picture Is Not Displayed Correctly

    “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections.

  • Page 209: ❽ Pc Control Codes And Cable Connection

    9. Appendix ❽ PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT HDMI INPUT SELECT DisplayPort INPUT SELECT BNC INPUT SELECT BNC(CV) INPUT SELECT BNC(Y/C) INPUT SELECT COMPUTER INPUT SELECT HDBaseT INPUT SELECT SLOT PICTURE MUTE ON PICTURE MUTE OFF...

  • Page 210: ❾ Troubleshooting Check List

    9. Appendix ❾ Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently.
  • Page 211 Video adapter: Other: Projector Video equipment Blu-ray player VCR, Blu-ray player, Video camera, Video game or other Manufacturer: Signal cable Model number: NEC standard or other manufacturer’s cable? Model number: Length: inch/m Distribution amplifier Model number: Switcher Model number: Adapter...
  • Page 212 © NEC Display Solutions, Ltd. 2015 7N952341...

This manual is also suitable for:

Px803ul-bkPx1004ul-whPx10004ul-bk

Table of Contents