Table of Contents
Advertisement
The INPUT SELECT Menu
The INPUT SELECT menu is used for selecting the
input signal.
Items that can be selected are highlighted in green.
You cannot select the items indicated in white.
V I D E O : V I D E O
INPUT
SELECT
I N P U T - A
I N P U T - B
PIC
CTRL
S W I T C H E R : S W ' E R 1 - 1
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL:
SET:
ENTER
VIDEO
This item cannot be selected with this projector.
INPUT-A
Selects signal input from the INPUT A connectors.
I N P U T - A
V I D E O : V I D E O
INPUT
SELECT
I N P U T - A
I N P U T - B
PIC
CTRL
S W I T C H E R : S W ' E R 1 - 1
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL:
SET:
ENTER
EXIT: MENU
Notes
• When the PC-1271/1271M Signal Interface Switcher
is connected to the INPUT A connectors using the
5BNC cables, INPUT-A cannot be selected.
• If the setting of INPUT A in the SET SETTING
menu is incorrect, the picture may be distorted.
For details, see page 36.
30
Adjustments and settings using the menu
I N P U T - A
EXIT: MENU
INPUT-B
Selects signal input from the connectors on the signal
interface board (not supplied) installed to the INPUT B
section.
I N P U T - A
V I D E O : V I D E O
INPUT
SELECT
I N P U T - A
I N P U T - B
PIC
CTRL
S W I T C H E R : S W ' E R 1 - 1
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL:
SET:
ENTER
EXIT: MENU
Notes
• When the PC-1271/1271M Signal Interface Switcher
is connected to the projector via the IFB-40 Signal
Interface Board installed to the INPUT B section,
INPUT-B cannot be selected.
• If the setting of INPUT B in the SET SETTING
menu is incorrect, the picture may be distorted.
For details, see page 36.
SWITCHER
When the PC-1271/1271M Signal Interface Switcher
is connected to the projector, selects signal input from
the Switcher.
I N P U T - A
V I D E O : V I D E O
INPUT
SELECT
I N P U T - A
I N P U T - B
PIC
CTRL
S W I T C H E
S W E R 1 - 1
S W E R 1 - 2
INPUT
SETTING
S W E R 1 - 3
S W E R 1 - 4
SET
SETTING
INPUT
INFO.
SEL:
SET:
EXIT: MENU
ENTER
You can select SW'ER1-1 to SW'ER2-8 in the pop-up
menu. They are always displayed in green even when
no signal is input.
Note
SWITCHER can be selected only when the IFB-40
Signal Interface Board is installed to the INPUT B
section, or when 5BNC MODE in the SET SETTING
menu is set to ON.
Advertisement
Table of Contents
