NEC Univerge DT750 User Manual page 70

Note:
Be sure not to turn OFF the DT750 while "Sav-
ing..." is displayed on the LCD.
STEP 19:After the data backup is complete, the display
changes as follows:
Upload Complete!
Reset the DT750 by pressing Exit soft key.
Note: When the data backup ends in failure, "Upload
Failed!" is displayed on the LCD. Check to see
the following and then make a retry.
Check Points
A different file name is
specified between DT750
and FTP/TFTP server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
Exit
Actions
Set the same file name
from both DT750 and FTP/
TFTP server.
Set the proper IP address
of FTP/TFTP server.
The power to FTP/TFTP
server or network
equipment is OFF.
LAN cable is disconnected.
63
Turn on the power.
Reconnect the cable
securely.