Asus ESC700 User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Server
  5. ESC700
  6. User manual
Asus ESC700 User Manual

Asus ESC700 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ESC700 G3
Workstation
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Asus ESC700

Summary of Contents for Asus ESC700

  • Page 1 ESC700 G3 Workstation User Guide...
  • Page 2 ASUSTeK COMPUTER INC. (“ASUS”). ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no...

  • Page 3: Table Of Contents

    About this guide ......................ix Chapter 1: Product Introduction System package contents ................. 1-2 Serial number label ..................1-2 ESC700 G3 specifications summary ............1-3 Front panel features ................... 1-5 Rear panel features ..................1-6 Internal features ..................1-7 LED information ..................1-8 1.7.1...
  • Page 4 4.6.10 NVMe Configuration ..............4-45 Monitor menu ................... 4-46 Boot menu ....................4-48 Tool menu ....................4-54 4.9.1 ASUS EZ Flash 2 Utility ............4-54 4.9.2 ASUS Overclocking Profile ............4-55 4.9.3 ASUS SPD Information ............. 4-56 4.10 Exit menu ....................4-57 4.11...
  • Page 5 Support DVD information ................6-2 6.2.1 Running the support DVD ............6-2 6.2.2 Obtaining the software manuals..........6-4 Software information ................. 6-5 ASUS Utilities ..................... 6-5 6.4.1 USB Charger+ ................6-7 Audio configurations ................. 6-8 Appendix ASUS contact information ..................A-2...

  • Page 6: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.

  • Page 7: Reach

    If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at http://support.asus.com...

  • Page 8: Safety Information

    Safety information Electrical Safety • Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged. • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.

  • Page 9: About This Guide

    About this guide Audience This user guide is intended for system integrators, and experienced users with at least basic knowledge of configuring a server. Contents This guide contains the following parts: Chapter 1: Product Introduction This chapter describes the general features of the server, including sections on front panel and rear panel specifications.
  • Page 10 Refer to the following sources for additional information, and for product and software updates. ASUS Server Web-based Management (ASWM) user guide This manual tells how to set up and use the proprietary ASUS server management utility. ASUS websites The ASUS websites worldwide provide updated information for all ASUS hardware and...

  • Page 11: Chapter 1: Product Introduction

    Chapter 1: Product Introduction Product Introduction This chapter describes the general features of the server, including sections on front panel and rear panel specifications.

  • Page 12: System Package Contents

    If any of the above items is damaged or missing, contact your retailer. Serial number label Before requesting support from the ASUS Technical Support team, you must take note of the product’s serial number containing 12 characters such as xxS0xxxxxxxx shown as the figure below.
  • Page 13 ESC700 G3 specifications summary The ASUS ESC700 G3 is a workstation featuring the ASUS X99-WS/SYS server board. LGA2011-v3 socket for the Next Generation Intel Core™ i7/Xeon ® ® E5-2600/1600 v3 processors Chipset Intel X99 Express Chipset ® 8 x DIMM DDR4 max at 128 GB 2133 MHz, non-ECC unbuffered memory (When installing Intel Socket 2011-v3 Core™...

  • Page 14: Esc700 G3 Specifications Summary

    ESC700 G3 specifications summary 1 x 4-pin CPU Fan connector for both 3-pin (DC Mode) and 4-pin (PWM Mode) CPU coolers control with auto detection support 1 x 4-pin CPU OPT Fan connector 4 x 4-pin Chassis Fan connectors for both 3-pin (DC Mode) and 4-pin...

  • Page 15: Front Panel Features

    Front panel features The ESC700 G3 workstation features a simple yet stylish front panel design. The power and reset buttons, LED indicators, optical drive, and USB ports are all conveniently located at the front panel for easy access. Optical Drive (Optional) Empty 5.25-inch bay...

  • Page 16: Rear Panel Features

    Rear panel features The rear panel includes a slot for the motherboard rear I/O ports, expansion slots, a vent for the system fan, and the power supply module. 700W Gold Power connector Single power supply USB 2.0 ports USB BIOS flashback button Gigabit LAN port 1 120 mm x 120 mm Gigabit LAN port 2...

  • Page 17: Internal Features

    Internal features The ASUS ESC700 G3 Pedestal server system includes the basic components as shown: Power supply unit 120 mm x 120 mm system fan ASUS X99-WS/SYS Server Board Expansion card locks Optical drive (Optional) 1 x 5.25-inch drive bay Front I/O board (hidden) 3 x 3.5-inch Internal HDD bays...

  • Page 18: Led Information

    LED information 1.7.1 Front panel LEDs HDD Access LED Power LED Icon Display status Description Power LED System power ON No activity HDD Access LED Read/write data into the HDD Blinking 1.7.2 Rear panel LEDs ACT/LINK LED SPEED LED ACT/LINK LED SPEED LED Status Description...

  • Page 19: Chapter 2: Hardware Setup

    Chapter 2: Hardware Setup Hardware Setup This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.

  • Page 20: Chassis Cover

    Chassis cover 2.1.1 Removing the side cover • Ensure that you unplug the power cord before removing the side cover. • Take extra care when removing the side cover. Keep your fingers from components inside the chassis that can cause injury, such as the CPU fan, rear fan, and other sharp-edged parts. • The images of the barebone server shown in this section are for reference purposes only and may not exactly match the model you purchase. To remove the side cover: Remove the two screws that secure the side cover.
  • Page 21 Slightly pull the side cover toward the rear just enough to detach it from the chassis. Remove the cover and set it aside. ASUS ESC700 G3...

  • Page 22: Cpu Installation

    The motherboard comes with a surface mount LGA2011-v3 socket designed for Intel Core™ i7 processors. • Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA2011-v3 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
  • Page 23 Triangle mark Triangle mark ASUS ESC700 G3...
  • Page 24 Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. Chapter 2: Hardware Setup...

  • Page 25: Cpu Heatsink And Fan Assembly Installation

    CPU heatsink and fan assembly installation To install the CPU heatsink and fan assembly ASUS ESC700 G3...

  • Page 26: System Memory

    System memory The motherboard comes with eight DDR 4 (Double Data Rate 4) Quad Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations Chapter 2: Hardware Setup...

  • Page 27: Memory Configurations

    The stability and compatibility of the memory modules depend on the CPU’s capabilities and other installed devices. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL. ASUS ESC700 G3...

  • Page 28: Installing A Dimm On A Single Clip Dimm Socket

    2.4.1 Installing a DIMM on a single clip DIMM socket Unlock a DIMM socket by pressing the DIMM notch retaining clip outward. Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the socket. DIMM slot key Unlocked retaining clip A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM. Hold the DIMM by both of its ends then insert the DIMM vertically into the socket. Apply force to both ends of the DIMM simultaneously until the retaining clip snaps back into place and the DIMM cannot be pushed in any further to ensure proper sitting of the DIMM. Locked Retaining Clip Always insert the DIMM into the socket vertically to prevent DIMM notch damage. • To install two or more DIMMs, refer to the user guide bundled in the motherboard package.

  • Page 29: Front Panel Cover

    Removing the front panel cover To remove the front panel cover: 1. Locate the front panel assembly lock then slide it outward to unlock the latches that secures the front panel cover to the chassis. Assembly lock Remove the front panel assembly from the chassis and set it aside. Front panel assembly ASUS ESC700 G3 2-11...

  • Page 30: Inch Drives

    5.25-inch drives This system comes with three 5.25-inch drive bays located on the upper front section of the chassis. If your system came with an optical drive, the optical drive occupies the topmost bay (1). The lower bays (2 and 3) are available for additional 5.25-inch optical, zip, or floppy disk drives. Installing a 5.25-inch drive To install a 5.25-inch drive: Remove the front panel cover.
  • Page 31 Connect the SATA cable to the SATA connector of the drive. Connect a SATA power cable from the power supply to the power connector of the drive. Reinstall the front panel cover. SATA power cable SATA cable ASUS ESC700 G3 2-13...

  • Page 32: Hard Disk Drives (Hdd)

    Hard disk drives (HDD) The server system supports three (3) 3.5-inch Serial ATA hard disk drives via the hard disk drive bays and one 2.5-inch HDD/SSD drive at the bottom of the HDD cage. Installing 3.5-inch HDDs To install 3.5-inch Serial ATA hard disk drives: Remove the side cover of the chassis. Refer to the Removing the side cover section for more information. Prepare the 3.5-inch HDD and the bundled set of screws. Locate the HDD cage lock, press the it up (A), then swing the HDD cage outwards (B) until it clicks in place. HDD cage lock HDD cage Align and insert the 3.5-inch HDD into the drive bay ensuring that the screw holes on the HDD matches the screw holes on the HDD cage.
  • Page 33 5. Secure the 3.5-inch HDD to the HDD cage using the bundled set of screws. 6. Swing the HDD cage inwards until it clicks back into place. Connect the SATA cable and SATA power cable to the 3.5-inch HDD. ASUS ESC700 G3 2-15...
  • Page 34 Installing 2.5-inch HDD/SSD To install a 2.5-inch HDD/SSD: Remove the side cover of the chassis. Refer to the Removing the side cover section for more information. Prepare the 2.5-inch HDD/SDD and the bundled set of screws. Lay the system on its side on a flat and stable surface. Locate the HDD cage lock, press it up (A), then swing the HDD cage outwards (B). Align and insert the 2.5-inch HDD/SSD into the drive bay as shown. Push it all the way until its screw holes align with the holes on the drive bay. HDD cage lock 2.5-inch HDD/SSD HDD cage Matching screw holes...
  • Page 35 Secure the 2.5-inch HDD/SSD to the HDD cage using the bundled set of screws. Swing the HDD cage inwards until it clicks back into place. Connect a SATA cable and a SATA power cable to the 2.5-inch HDD/SSD. ASUS ESC700 G3 2-17...

  • Page 36: Expansion Slots

    Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot Description Slot No. 40-LANE 28-LANE PCIe 3.0/2.0 x16_1 slot PCIe 3.0/2.0 x16_1 slot PCIe 3.0/2.0 x16_2 slot PCIe 3.0/2.0 x16_2 slot PCIe 3.0/2.0 x16_3 slot PCIe 3.0/2.0 x16_3 slot PCIe 3.0/2.0 x16_4 slot PCIe 3.0/2.0 x16_4 slot* PCIe 3.0/2.0 x16_5 slot PCIe 3.0/2.0 x16_5 slot *This slot may not work if a 28-LANE CPU is installed. 2-18 Chapter 2: Hardware Setup...

  • Page 37: Installing An Expansion Card

    2.8.1 Installing an expansion card To install an expansion card: Lay the system on its side on a flat, stable surface. Press the PCI-E latch (A), hold it by its edge then lift it towards the rear (B). Edge of the PCI-E latch PCI-E latch Remove the screw (A) that secures the metal bracket to the chassis then remove the metal bracket (B). Screw Metal bracket ASUS ESC700 G3 2-19...
  • Page 38 Align and insert the expansion card into Expansion card the PCI-E slot. PCI-E slot Lift the PCI-E latch inwards until it clicks into place securing the expansion card to the chassis. PCI-E latch (Optional) Replace the screw of the metal bracket. 2-20 Chapter 2: Hardware Setup...

  • Page 39: Configuring An Expansion Card

    PCIe 3.0/2.0 PCIe 3.0/2.0 PCIe 3.0/2.0 PCIe 3.0/2.0 configuration x16_1 x16_2 x16_3 x16_4 x16_5 Single VGA/PCIe card Dual VGA/PCIe cards Quintuple VGA/ PCIe cards • We recommend that you provide sufficient power when running CrossFireX™ or SLI™ mode. • Connect a chassis fan to the motherboard connector labeled REAR_FAN1 or FRNT_ FAN1-3 when using multiple graphics cards for better thermal environment. ASUS ESC700 G3 2-21...
  • Page 40 IRQ assignments for this motherboard PCIe x16_1 shared – – – – – – – PCIe x16_2 shared – – – – – – – PCIe x16_3 shared – – – – – – – PCIe x16_4 shared – – – – – – –...

  • Page 41: System Fan

    Remove the four system fan screws at the rear panel. Keep the screws for later use. Hold the system fan with one hand while removing the system fan screws. Remove the system fan. Follow the previous instructions in reverse order if you want to reinstall the system fan. ASUS ESC700 G3 2-23...

  • Page 42: Bios Update Utility

    • If the light flashes for five seconds and turns into a solid light, this means that the BIOS Flashback is not operating properly. This may be caused by improper installation of the USB storage device and filename/file format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. 2-24 Chapter 2: Hardware Setup...

  • Page 43: Motherboard Rear And Audio Connection

    USB 3.0 ports 56 USB BIOS Flashback) USB BIOS Flashback button Optical S/PDIF Out port Intel LAN port (LAN2)* Audio I/O ports** ® Intel LAN port (LAN1)* ® * and **: Refer to the tables on the next page for the LAN port LEDs and audio port definitions. ASUS ESC700 G3 2-25...
  • Page 44 • The plugged USB 3.0 device may run on xHCI mode or EHCI mode, depending on the operating system’s setting. • USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices. • Due to the design of the Intel X99 series chipset, all USB devices connected to the ® USB 2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices must update their firmware for better compatibility. * LAN ports LED indications Activity Link LED Speed LED Status Description Status Description...

  • Page 45: Audio I/O Connection

    2.11.2 Audio I/O connection Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers ASUS ESC700 G3 2-27...
  • Page 46 Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers 2-28 Chapter 2: Hardware Setup...
  • Page 47 Connect to 7.1 channel Speakers When the DTS UltraPC II function is enabled, ensure to connect the rear speaker to the light blue port. ASUS ESC700 G3 2-29...
  • Page 48 2-30 Chapter 2: Hardware Setup...

  • Page 49: Chapter 3: Motherboard Information

    Chapter 3: Motherboard Information Motherboard Information This chapter includes the motherboard layout and brief descriptions of the jumpers and internal connectors.

  • Page 50: Motherboard Layout

    Motherboard layout Refer to 3.5 Internal connectors and 1.5 Rear panel features for more information about rear panel connectors and internal connectors. Chapter 3: Motherboard Information...

  • Page 51: Layout Contents

    23. Q-Code Leds 3-12 24. Serial port connector (10-1 pin COM1) 3-16 25. Front panel audio connector (10-1 pin AAFP) 3-19 26. Digital audio connector (4-1 pin SPDIF_OUT) 3-16 27. M.2 connector (SOCKET 3) 3-26 28. LGA2011-v3 CPU socket ASUS ESC700 G3...

  • Page 52: Onboard Buttons And Switches

    Onboard buttons and switches Onboard buttons and switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. Power-on button The motherboard comes with a power-on button that allows you to power up or wake up the system.
  • Page 53 BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function. ASUS ESC700 G3...
  • Page 54 TPU switch With its two-level adjustment functions, the TPU allows you to automatically adjusts the CPU ratio and clock speed for an optimal system performance. • Enable this switch when the system is powered off. • When the TPU switch is set to Enabled (TPU_I: CPU Ratio Boost), the system automatically adjusts the CPU ratio for an enhanced performance.
  • Page 55 • You may change the EPU settings in BIOS setup program and enable the EPU function at the same time. However, the system will use the last setting you have made. ASUS ESC700 G3...
  • Page 56 Clear CMOS button (CLR_CMOS) Press this button to clear the BIOS setup information only when the systems hangs due to overclocking. EZ XMP switch Enable this switch to overclock the installed DIMMs, allowing you to enhance the DIMM’s speed and performance. The EZ XMP LED (XLED1) lights up when you enable the EZ XMP switch.

  • Page 57: Jumpers

    These jumpers allow you to switch fan pin selection. The CHAFAN_SEL jumper is for the front fans and rear fans control. Set pins 1-2 to let the BIOS control the settings of the chassis fans. Set pins 2-3 to control the settings of the 4-pin PWM fans. ASUS ESC700 G3...

  • Page 58: Onboard Leds

    Onboard LEDs Diagnosis LEDs (DIAG_VGA, DIAG_HDD, DIAG_DRAM, DIAG_CPU) The Diagnosis LEDs provide the status of these key components during POST (Power- On-Self Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component’s LED stays lit up until the problem is solved. TPU LED (TPU_LED) The TPU LED lights up when the TPU switch is enabled.
  • Page 59 EPU LED (O2LED3) The EPU LED lights up when the EPU switch is enabled. EZ XMP LED (XLED1) This LED lights up when you enable the EZ XMP switch. ASUS ESC700 G3 3-11...
  • Page 60 Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. Chapter 3: Motherboard Information 3-12...
  • Page 61 Recovery process started Recovery firmware image is found Recovery firmware image is loaded F5 – F7 Reserved for future AMI progress codes Recovery PPI is not available Recovery capsule is not found (continued on the next page) ASUS ESC700 G3 3-13...
  • Page 62 Code Description Invalid recovery capsule Reserved for future AMI error codes FB – FF DXE Core is started NVRAM initialization Installation of the PCH Runtime Services 63 – 67 CPU DXE initialization is started PCI host bridge initialization System Agent DXE initialization is started System Agent DXE SMM initialization is started System Agent DXE initialization (System Agent module specific) 6B –...
  • Page 63 System is waking up from the S3 sleep state System is waking up from the S4 sleep state System has transitioned into ACPI mode. Interrupt controller is in PIC mode. System has transitioned into ACPI mode. Interrupt controller is in APIC mode. ASUS ESC700 G3 3-15...

  • Page 64: Internal Connectors

    Internal connectors Serial port connector (10-1 pin COM1) This connector is for the serial (COM) port. Connect the serial port module cable to one of these connectors, then install the module to a slot opening at the back of the system chassis.
  • Page 65 • The SATAEXPRESS_1 connector can support one SATA Express device or two SATA devices. • Due to chipset behavior, the SATA6G_78 and SATA6G_910 ports (black) do not support Intel Rapid Storage Technology and RAID configuration. ® ASUS ESC700 G3 3-17...
  • Page 66 Serial ATA 3.0 6 Gb/s connectors (7-pin SSATA_1-4 [gray]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives that allows up to 6 Gbps of data transfer rate. If you installed Serial ATA hard disk drives, you can use a software RAID solution to create a RAID 0, RAID 1, RAID 5, or a RAID 10 configuration.
  • Page 67 • If you want to connect a high-definition or an AC’97 front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio] or [AC97]. ASUS ESC700 G3 3-19...
  • Page 68 USB 3.0 connectors (20-1 pin USB3_12, USB3_34) These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0.
  • Page 69 DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports.
  • Page 70 CPU and chassis fan connectors (4-pin CPU_FAN1-2; 4-pin REAR_FAN1; 4-pin FRNT_FAN1-3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
  • Page 71 1000W power or above to ensure the system stability. • If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. ASUS ESC700 G3 3-23...
  • Page 72 System panel connector (20-1 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Page 73 Connect the button cable that supports DirectKey, from the chassis to this connector on the motherboard. Ensure that your chassis comes with the extra button cable that supports the DirectKey feature. Refer to the technical documentation that came with the chassis for details. ASUS ESC700 G3 3-25...
  • Page 74 M.2 socket 3 This socket allows you to install an M.2 (NGFF) SSD module. • This socket supports M Key and type 2260/2280 storage devices. • This socket supports PCIe and SATA modes. T_Sensor connector (2-pin T_SENSOR1) This connector is for the thermistor cable that allows you to monitor the temperature of your motherboard’s critical components and connected devices.
  • Page 75 A message appears when you connect the sensor or switch at the first time or when you reconnect the sensor or switch to this connector. Reset the system to exit the message. ASUS ESC700 G3 3-27...
  • Page 76 Chapter 3: Motherboard Information 3-28...

  • Page 77: Chapter 4: Bios Setup

    Chapter 4: BIOS Setup BIOS Setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

  • Page 78: Knowing Bios

    Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

  • Page 79: Bios Setup Program

    See section 3.2 Onboard buttons and switches for information on how to erase the RTC RAM via the Clear CMOS button. • The BIOS setup program does not support Bluetooth devices. ASUS ESC700 G3...

  • Page 80: Advanced Mode

    4.2.1 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. EZ Tuning Wizard Quick Note Hot Keys MyFavorite Language...

  • Page 81: Menu Bar

    This button above the menu bar allows you to view and tweak the overclocking settings of your system. It also allows you to change the motherboard’s SATA mode from AHCI to RAID mode. Refer to section 4.2.2 EZ Tuning Wizard for more information. ASUS ESC700 G3...

  • Page 82: Hot Keys

    Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. •...

  • Page 83: Ez Tuning Wizard

    Select the CPU fan type (Box cooler, Tower cooler, or Water cooler) that you installed then click Next. If you are not sure of the CPU fan type, click I’m not sure. The system automatically detects the CPU fan type. Click Next then click Yes to confirm auto-tuning. ASUS ESC700 G3...
  • Page 84 Creating RAID To create RAID: Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. Click RAID then click Next. • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel SATA connectors.

  • Page 85: My Favorites

    My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. ASUS ESC700 G3...
  • Page 86 Adding items to My Favorites To add BIOS items: Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.

  • Page 87: Main Menu

    RTC RAM via the Clear CMOS button. • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]. ASUS ESC700 G3 4-11...

  • Page 88: Administrator Password

    Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. To set an administrator password: Select the Administrator Password item and press <Enter>.

  • Page 89: Ai Tweaker Menu

    This item allows you to select a strap close to your target BCLK (base clock) for an extreme overclocking, or leave it at [Auto] for the BIOS to upgrade. Configuration options: [Auto] [100MHz] [125MHz] [166MHz] [250MHz] ASUS ESC700 G3 4-13...
  • Page 90 The value ranges depend on the value you set on BCLK Frequency. ASUS MultiCore Enhancement [Auto] [Auto] This item allows you to maximize the oveclocking performance optimized by ASUS core ratio settings. [Disabled] This item allows you to set to default core ratio settings. CPU Core Ratio [Sync All Cores] This item allows you to set the CPU core ratio limit per core or synchronize automatically to all cores.
  • Page 91 Max. CPU Cache Ratio [Auto] This item allows you to set the maximum possible ratio on the Uncore part of the processor. Use the <+> or <-> keys to adjust the value. The values depend on the CPU installed. ASUS ESC700 G3 4-15...

  • Page 92: Dram Timing Control

    [Keep Current Settings]. EPU Power Saving Mode [Disabled] The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition.
  • Page 93 Configuration options: [Auto] [1] – [15] DRAM WRITE to READ Delay L [Auto] Configuration options: [Auto] [1] – [15] DRAM CKE Minimum Pulse Width [Auto] Configuration options: [Auto] [4] – [8] DRAM Write Latency [Auto] Configuration options: [Auto] [1] – [31] ASUS ESC700 G3 4-17...
  • Page 94 Third Timings tRRDR [Auto] Configuration options: [Auto] [1] - [7] tRRDD [Auto] Configuration options: [Auto] [1] - [7] tWWDR [Auto] Configuration options: [Auto] [1] - [7] tWWDD [Auto] Configuration options: [Auto] [1] - [7] tRWDR [Auto] Configuration options: [Auto] [1] - [7] tWRDR [Auto] Configuration options: [Auto] [1] - [7] tWRDD [Auto]...
  • Page 95 DRAM IO-L (CHB D0 R0) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHB D0 R1) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHB D1 R0) [Auto] Configuration options: [Auto] [1] - [255] ASUS ESC700 G3 4-19...
  • Page 96 DRAM IO-L (CHB D1 R1) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHC D0 R0) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHC D0 R1) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHC D1 R0) [Auto] Configuration options: [Auto] [1] - [255] DRAM IO-L (CHC D1 R1) [Auto] Configuration options: [Auto] [1] - [255]...
  • Page 97 Configuration options: [Auto] [1.00] - [1.60] Receiver ODT Pre-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] Receiver ODT De-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] Transmitter ODT De-emphasis [Auto] Configuration options: [Auto] [1.00] - [1.60] ASUS ESC700 G3 4-21...
  • Page 98 MISC DRAM Eventual Voltage (CHA/CHB/CHC/CHD) [Auto] Use <+> or <-> to adjust the eventual voltages of the DIMM slots. The values range from 0.8 V to 1.9 V with a 0.10 V increment. DRAM CLK Period [Auto] This item allows you to set a DRAM clock period. Configuration options: [Auto] [1] –...
  • Page 99 Power Phase Response [Fast] This item allows you to set a faster phase response for the CPU to increase system performance or to slower phase response to decrease DRAM power efficiency. Configuration options: [Ultra Fast] [Fast] [Medium] [Regular] ASUS ESC700 G3 4-23...
  • Page 100 This item allows you to set the DRAM power phase control. Standard The phase control is based on the CPU command. Optimized Set to the ASUS optimized phase tuning profile. Extreme Set to the full phase mode. Chapter 4: BIOS Setup...
  • Page 101 This item allows you to improve the power rating when the CPU is in low power state, or make the FIVR (fully integrated voltage regulator work in high performance at all times. Configuration options: [Auto] [High Performance] [Balanced] ASUS ESC700 G3 4-25...
  • Page 102 Extreme Over-voltage [Disabled] Disable this item to protect the CPU from damage by over-voltage or enable to choose a high voltage for overclocking. Configuration options: [Disabled] [Enabled] You can only enable this item if you enable the CPU OverVoltage jumper on your motherboard.
  • Page 103 The values range from 0.001 V to 1.920 V with a 0.001 V interval. Total Adaptive Mode CPU Cache Voltage [Auto] This item sums up the voltages of the CPU Cache Voltage offset and Additional Turbo Mode CPU Cache Voltage options. ASUS ESC700 G3 4-27...
  • Page 104 CPU SVID Support [Auto] Set this item to [Enabled] when overclocking. Disabling this item prevents the CPU from communicating with the external voltage regulator. Configuration options: [Auto] [Disabled] [Enabled] The following items appear only when you set the CPU Core Voltage to [Enabled]. SVID Voltage Override[Auto] This item allows you to set a VCCIN for the CPU during initial part of POST.
  • Page 105 This item allows you to enhance the BCLK overclocking capability or reduce the EMI (electromagnetic disturbance) generated by the BCLK. Set this item to [Enabled] for EMI reduction, or set this item to [Disabled] to enhance BCLK overclocking. Configuration options: [Auto] [Disabled] [Enabled] ASUS ESC700 G3 4-29...

  • Page 106: Advanced Menu

    Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Chapter 4: BIOS Setup 4-30...

  • Page 107: Cpu Configuration

    Configuration options: [Disabled] [Enabled] Execute Disable Bit [Enabled] Execute Disable prevents certain classes of malicious buffer overflow attacks when combined with a supporting OS (SuSE Linux 9.2, RedHat Enterprise 3 Update 3). Configuration options: [Disabled] [Enabled] ASUS ESC700 G3 4-31...

  • Page 108: Active Processor Cores

    Intel Virtualization Technology [Disabled] When set to [Enabled], a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Configuration options: [Disabled] [Enabled] Hardware Prefetcher [Enabled] This item allows the CPU to prefetch commands and data in the L2 cache, reduces the DRAM loading time and improves the system performance.
  • Page 109 Configuration options: [Enabled] [Disabled] Package C State limit [Auto] This item allows you to set the a C-state support for the CPU package. Configuration options: [Auto] [C0/C1 state] [C2 state] [C6 (non Retention) state] [C6 (Retention) state] ASUS ESC700 G3 4-33...

  • Page 110: Pch Configuration

    4.6.2 PCH Configuration PCI Express Configuration This item allows you to configure the PCI Express slots. PCIe Speed [Auto] This item allows your system to automatically select the PCI Express port speed. When set to [Gen1], the PCI-E port runs at PCI-E 1.0 speed. When set to [Gen2], the PCI-E port runs at PCI-E 2.0 speed.

  • Page 111: Pch Storage Configuration

    Scroll down to display the other BIOS items. Hyper kit Mode [Disabled] Enable this item for “ASUS Hyper kit” card, or disable this item for M.2 devices. Configuration options: [Enabled] [Disabled] SATAExpress_1 SRIS Support [Auto] When set to [Auto], this item allows the system to automatically adjust the SRIS (Separate Reference Clock Independent Spread Spectrum Clocking Architecture) support for connected SATA Express devices.
  • Page 112 SATA Controller 1 Mode Selection [AHCI] This item allows you to set the SATA configuration. [Disabled] Disables the SATA function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices. [AHCI Mode] Set to [AHCI Mode] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface).

  • Page 113: System Agent Configuration

    This item allows you to select the operating speed of the PCIEX16_4 slot. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] PCIEX16_5 Link Speed [Auto] This item allows you to select the operating speed of the PCIEX16_5 slot. Configuration options: [Auto] [Gen1] [Gen2] [Gen3] ASUS ESC700 G3 4-37...
  • Page 114 Intel VT for Directed I/O (VT-d) The item in this menu allows you to configure the Intel Virtualization Technology for Directed ® I/O (VT-d). Intel VT for Directed I/O (VT-d) [Disabled] This item allows you to enable/disable the Intel Virtualization Technology for Directed ®...

  • Page 115: Usb Configuration

    Your USB 2.0 devices can be used for BIOS setup only and cannot be recognized in the boot devices list. [Auto] Your system automatically detects the presence of USB 2.0 devices at startup. If any USB 2.0 devices are detected, the xHCI legacy USB support is enabled. ASUS ESC700 G3 4-39...
  • Page 116 xHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an xHCI hand-off feature. [Disabled] Disables the xHCI Hand-off support. EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand-off feature. [Disabled] Disables the EHCI Hand-off support. USB Single Port Control This item allows you to enable or disable the individual USB ports.

  • Page 117: Platform Misc Configuration

    This item allows you to enable/disable the PCH DMI ASPM Setting. Configuration options: [Disabled] [Enabled] ASPM Support [Disabled] This item allows you to enable/disable the ASPM support for all downstream devices. Configuration options: [Disabled] [L1 only] ASUS ESC700 G3 4-41...

  • Page 118: Onboard Devices Configuration

    4.6.7 Onboard Devices Configuration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] This item allows you to use the Azalia High Definition Audio Controller Configuration options: [Disabled] [Enabled] The following items appear only when you set the HD Audio Controller to [Enabled]. Front Panel Type [HD Audio] This item allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high-definition audio depending on the audio standard that the front panel...

  • Page 119: Serial Port Configuration

    This item allows you to enable/disable the serial port. Configuration options: [On] [Off] Change Settings [Auto] This item allows you to select an optimal setting for Super IO device. Configuration options: [IO=3F8h; IRQ=4;] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] ASUS ESC700 G3 4-43...

  • Page 120: Apm Configuration

    4.6.8 APM Configuration ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enabled (S4+S5] [Enabled (S5)] Restore AC Power Loss [Power Off] This item allows your system to go to ON state, OFF state, or both states after an AC power loss.

  • Page 121: Network Stack Configuration

    The following item appears only when you set the Network Stack to [Enabled]. Ipv4/Ipv6 PXE Support [Enabled] This item allows you to enable/disable the Ipv4/Ipv6 PXE wake event. Configuration options: [Disabled] [Enabled] 4.6.10 NVMe Configuration This item allows you to view the NVMe controller and drive information. ASUS ESC700 G3 4-45...

  • Page 122: Monitor Menu

    Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. CPU1 Temperature / TR1 Temperature [xxx°C/xxx°F] The onboard hardware monitor automatically detects and displays the CPU and the motherboard temperatures.
  • Page 123 This item allows you to set a duty cycle percentage to meet the thermal requirement for your system. Use the <+> or <-> keys to adjust the value. The values range from 0 to 100 with an interval of 5. ASUS ESC700 G3 4-47...

  • Page 124: Boot Menu

    Boot menu The Boot menu items allow you to change the system boot options. Boot Configuration Fast Boot [Enabled] [Disabled] This item allows your system to go back to its normal boot speed. [Enabled] This item allows your system to accelerate the boot speed. The following items appear only when you set the Fast Boot to [Enabled].
  • Page 125 This item allows you to enable/disable power-on state of the NumLock. Configuration options: [Enabled] [Disabled] Wait For ‘F1’ If Error [Enabled] This item allows your system to wait for the <F1> key to be pressed when error occurs. Configuration options: [Disabled] [Enabled] ASUS ESC700 G3 4-49...
  • Page 126 Option ROM Messages [Force BIOS] This item allows you to set the display mode for Option ROM. Configuration options: [Force BIOS] [Keep Current] INT19 Trap Response [Immediate] [Immediate] Executes the trap for INT19 immediately. [Postponed] Executes the trap during legacy boot. Above 4G Decoding [Disabled] This item allows you to decode the 64-bit capable devices above 4G address space.
  • Page 127 Configuration options: [Yes] [No] Load PK from File This item allows you to load the downloaded PK from a USB storage device. The PK file must be formatted as a UEFI variable structure with time-based authenticated variable. ASUS ESC700 G3 4-51...
  • Page 128 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft Secure Boot Key-Enrollment Key (KEK). ® Delete the KEK This item allows you to delete the KEK from your system. Configuration options: [Yes] [No] Load Default KEK This item allows you to load the downloaded KEK from a USB storage...
  • Page 129 ® ® supported). • To select the boot device during system startup, press <F8> when ASUS Logo appears. Boot Override These item displays the available devices. The number of device items that appear on the screen depends on the number of devices installed in the system. Click an item to start booting from the selected device.

  • Page 130: Tool Menu

    4.9.1 ASUS EZ Flash 2 Utility This item allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 131: Asus Overclocking Profile

    Key in a profile number from one to eight, press <Enter>, and then select Yes. Load/Save Profile from/to USB Drive This item allows you to load or save profile from your USB drive, load and save profile to your USB drive. ASUS ESC700 G3 4-55...

  • Page 132: Asus Spd Information

    4.9.3 ASUS SPD Information This item allows you to view the DRAM SPD information. Chapter 4: BIOS Setup 4-56...

  • Page 133: Exit Menu

    <Esc>, a confirmation window appears. Select Yes to discard changes and exit. Launch EFI Shell from USB drives This option allows you to attempt to launch the EFI Shell application (shellx64.efi) from one of the available file system devices. ASUS ESC700 G3 4-57...

  • Page 134: Updating Bios

    4.11.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk or an OS-based utility. Before you start using this utility, download the latest BIOS from the ASUS website at www.asus.com.
  • Page 135 DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu. See section 4.10 Exit Menu for details. ASUS ESC700 G3 4-59...

  • Page 136: Asus Crashfree Bios 3

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at http://support.asus.com and save it to a USB flash drive.
  • Page 137 (optical drive) to Drive D (USB flash drive). Welcome to FreeDOS (http://www.freedos.org)! C:/> d: D:/> Updating the BIOS file To update the BIOS file: On the FreeDOS prompt, type bupdater /pc /g and press <Enter>. D:/> bupdater /pc /g ASUS ESC700 G3 4-61...
  • Page 138 On the BIOS Updater screen, press <Tab> to switch from Files panel to Drives panel then select D:. ASUSTeK BIOS Updater for DOS V1.30 [2014/08/01] Current ROM Update ROM BOARD: X99-WS/SYS BOARD: Unknown VER: 0210 (H :00 B :00) VER: Unknown DATE: 10/30/2014...

  • Page 139: Chapter 5: Raid Configuration

    Chapter 5: RAID Configuration RAID Configuration This chapter provides instructions for setting up, creating, and configuring RAID sets using the available utilities.

  • Page 140: Raid Configurations

    RAID configurations The motherboard supports Intel Rapid Storage Technology with RAID 0, RAID 1, RAID 10, ® and RAID 5 solution. If you want to install a Windows operating system to a hard disk drive included in a RAID ® set, you have to create a RAID driver disk and load the RAID driver during OS installation.

  • Page 141: Installing Serial Ata Hard Disks

    Save your changes, and then exit the BIOS Setup. Refer to Chapter 4 for details on entering and navigating through the BIOS Setup Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at RAID mode together. ASUS ESC700 G3...

  • Page 142: Intel ® Rapid Storage Technology Option Rom Utility

    5.1.4 Intel Rapid Storage Technology Option ROM utility ® To enter the Intel Rapid Storage Technology Option ROM utility: ® Turn on the system. During POST, press <Ctrl> + <I> to display the utility main menu. RAID Volumes: None defined. Physical Devices: Port Device Model...
  • Page 143 Serial # Size Status ST3160812AS 9LS0HJA4 149.0GB Non-RAID Disk ST3160812AS 9LS0F4HL 149.0GB Non-RAID Disk ST3160812AS 3LS0JYL8 149.0GB Non-RAID Disk ST3160812AS 9LS0BJ5H 149.0GB Non-RAID Disk Select 2 to 6 to use in creating the volume. [↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done ASUS ESC700 G3...
  • Page 144 Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),then press <Enter>.
  • Page 145 (This does not apply to Recovery volumes) Are you sure you want to delete “Volume0”? (Y/N): Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to return to the DELETE VOLUME menu. ASUS ESC700 G3...

  • Page 146: Creating A Raid Driver Disk

    Exiting the Intel Rapid Storage Technology Option ROM utility ® To exit the utility: From the utility main menu, select 5. Exit, then press <Enter>. The following warning message appears: [CONFIRM EXIT] Are you sure you want to exit? (Y/N): Press <Y>...

  • Page 147: Installing The Raid Driver During Windows ® Os Installation

    Before loading the RAID driver from a USB flash drive, you have to use another computer to copy the RAID driver from the support DVD to the USB flash drive. To set up a Windows UEFI operating system under RAID mode, ensure to load the UEFI ® driver for your optical drive. ASUS ESC700 G3...
  • Page 148 Chapter 5: RAID Configuration 5-10...

  • Page 149: Chapter 6: Driver Installation

    Chapter 6: Driver Installation Driver Installation This chapter provides the instructions for installing the necessary drivers for different system components.

  • Page 150: Installing An Operating System

    8.1 operating systems. ® ® ® To run the support DVD: Place the Support DVD into the optical drive. In the AutoPlay dialog box, click or tap Run ASSETUP.EXE. If the AutoPlay dialog box does not appear, browse the contents of the support DVD and double-click or tap \\bin\ASSETUP.EXE to launch the ASUS motherboard support DVD main menu. Chapter 6: Driver Installation...
  • Page 151 Click or tap to display the The Utilities menu ASUS contact shows the applications information. and other software that the motherboard supports. Click or tap an icon to display DVD/motherboard information Click or tap an item to install ASUS ESC700 G3...

  • Page 152: Obtaining The Software Manuals

    6.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual files are in Portable Document Format (PDF). Install the Adobe ® Acrobat Reader from the Utilities tab before opening the files. ® To read about your motherboard’s utility guide: Click or tap Manual tab > ASUS Motherboard Utility Guide. From the Manual folder, open the folder of the software manual that you wish to read. Some software manuals are provided in different languages. Open the language’s folder to view the software manual. The screenshots in this section are for reference only. The actual software manuals containing in the support DVD vary by models. Chapter 6: Driver Installation...

  • Page 153: Software Information

    ASUS Utilities Your motherboard supports the following utilities: • USB Charger+ To install these utlities on your computer: Windows 7 OS ® Place the Support DVD into the optical drive. In the AutoPlay dialog box, click Run ASSETUP.exe then select the Utilities tab 3. From the Utilities tab, click the name of the utility then follow the succeeding onscreen instructions. ASUS ESC700 G3...
  • Page 154 Windows 8 / Windows 8.1 OS ® ® Place the Support DVD into the optical drive then follow onscreen instructions. From the ASUS motherboard support DVD main menu, select the Utilities tab and click AI Suite 3. 3. Follow the succeeding onscreen instructions. If the ASUS motherboard support DVD main menu did not appear, try the following steps: Go to the Start Screen then click or tap the Desktop app. On the lower left corner of the Desktop, click or tap File Explorer then select your DVD drive and tap or double-click the Setup application.

  • Page 155: Usb Charger

    Click or tap to select the type of USB device that you wish to charge when the system is off Ensure to connect your USB device into the USB port that supports this utility. Refer to section 1.5 Rear panel features of your user guide for more details. • The USB Charger+ does not support USB hubs and USB extension cables, and generic USB cables. • The USB Charger+ may not recognize some ASUS devices due to a special design. ASUS ESC700 G3...

  • Page 156: Audio Configurations

    Audio configurations The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio ® experience on your computer. The software provides Jack-Sensing function, S/PDIF Out support, and interrupt capability. The CODEC also includes the Realtek proprietary UAJ ® ® (Universal Audio Jack) technology for all audio ports, eliminating cable connection errors, and giving users plug and play convenience. Follow the installation wizard to install the Realtek Audio Driver from the support DVD that ® came with the motherboard package. If the Realtek audio software is correctly installed, you will find the Realtek HD Audio ® ® Manager icon on the taskbar. Double-click or tap on the icon to display the Realtek ® Audio Manager. Realtek HD Audio Manager ®...

  • Page 157: Appendix

    Appendix Appendix...

  • Page 158: Asus Contact Information

    ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 +886-2-2890-7798 E-mail info@asus.com.tw Web site http://www.asus.com.tw Technical Support Telephone +86-21-38429911 +86-21-58668722 ext: 9101 Online Support http://support.asus.com/techserv/techserv.aspx ASUSTeK COMPUTER INC. (Taiwan) Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259...
  • Page 159 800 Corporate Way, Fremont, CA 94539, USA +1-510-608-4555 Web site http://usa.asus.com Technical Support Support fax +1-812-284-0883 General support +1-812-282-2787 Online support http://support.asus.com/techserv/techserv.aspx ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, D-40880 Ratingen, Germany +49-2102-959911 Web site http://www.asus.de Online contact http://www.asus.de/sales Technical Support Telephone +49-1805-010923...
  • Page 160 Web site http://www.asus.com Technical Support Telephone +31-(0)591-5-70292 +31-(0)591-666853 E-mail advance.rma.eu@asus.com Online Support http://support.asus.com/techserv/techserv.aspx ASUS Polska Sp. z o.o. (Poland) Address Ul. Postępu 6, 02-676 Warszawa, Poland Web site http://pl.asus.com Technical Support Telephone +48-225718033 Online Support http://support.asus.com/techserv/techserv.aspx ASK-Service (Russia and CIS) Address г.Москва, ул.

Table of Contents