Installation 1. Remove the packaging and take out the distance limiter from accessory in microwave oven (some models have been installed already), unlock the power cord, according to the specific shape of distance limiter, install by following the given instruction. The purpose of the distance limiter is to make the microwave oven to keep a certain distance from the wall.
Important safety instruction When using Microwave oven, the following precautions must be observed: 1. Read all instructions before using and keep it for future reference. 2. Only use utensils that are suitable for use in microwave ovens. 3. The minimum height of free space necessary should be at least 20mm above the top surface of the oven.
Page 4
13. Slowly lift the furthest edge of dishes cover and microwave plastic wrap and carefully open popcorn and oven cooking bags away from the face and hands. 14. To prevent the turntable from breaking: a. Let the turntable cool down before cleaning. b.
Household use only PRODUCT INTRODUCTION Appearance and structure diagram waveguide cover grill rack housing glass turntable POWER GRILL AUTO COOKING DEFROST oven cavity rotating axis door interlock rotating ring a. Do not remove the Waveguide cover during cleaning b. Make sure the Waveguide cover installation right and no damage during cooking...
2. Control panel Select grill or combi cooking menu Set power level Select Auto defrost menu Set clock press once stop cooking press twice clear setting Start Select cooking time or weight during cooking Select Auto cooking menu 3、LED instruction and display when the power level begin set or used POWER...
2. Clock setting Clock button make it available for you to input current or preset time when “:” flashes onto LED display after plugged in, or try to skip it over to continue if unnecessary. For example: to set 12:30 Depress Display :...
20% microwave power. Applicable for keeping warm Low power a. The max time which can be set is 60minutes b. Never operate the oven empty. c. If you turn the food during operation, press the Instant.Start button once and the preset cooking procedure will continue. d.
Page 9
Grill, the heat element will be energized during operation time. Which is applicable for rolling thin meats or pork, sausage, chicken wing as good brown color can be obtained Combination of Grill and microwave cooking. 30% of time microwave output and 70% of time light wave Combination of Grill and microwave cooking.
a. It is necessary to turn over the food during operation to obtain uniform effect. b. Usually defrosting will need longer time than that of cooking the food. c. If the food can be cut by knife, the defrosting process can be considered completed.
Page 11
Suitable for popping a bag of corn, which is available in the market, weighted 85g. Popcorn prior to completing, if the popping speed has Popcorn been decreased to 1 time per 1-2 seconds you should press stop.Clear button to stop the popping process Same as A.1 except 100g weight Popcorn...
Depress Display : 1. After power-up, the colon flashes Turn Auto Cooking/ Time. Weight knob to set the cooking menu 3. Start cooking by pressing Instant/Start button, and LED will 6:30 count down to show running time. 6. Automatic starting (delayed function) If you do not want the menu be started immediately, you can preset the cooking menu and time and the preset menu will be automatically started at your set time.
Page 13
Example: Now it is 12:30 clock, if you hope that the microwave oven will automatically start cooking with 100P microwave power for 9 minutes and 30 seconds at 14:20 Depress Display : After power-up, the colon flashes 00:00 Preset.Clock Depress button 12:00 turning...
7. Multi-sequence cooking To obtain best cooking result, some recipes call for different cook mode and time. You may program your personalized menu as follow: Example: You want cook food with 100P microwave for 3 minutes then 20P for 9 minutes. This is 2 sequence setting. Depress Display 100P microwave for 3min...
Depress and hold stop.Clear button about 3 set lock seconds Depress and hold stop.Clear button about 3 : cancel lock seconds 9. UTENSILS GUIDELINE It is strongly recommended to use the containers which are suitable and safe for microwave cooking. Generally speaking, the containers which are made of heat-resistant ceramic, glass or plastic are suitable for microwave cooking.
Page 16
Place thicker areas towards outside of dish, the thinner part towards the centre and spread it evenly. Do not overlap if possible. Cooking time length Start cooking with a short time setting, evaluate it after it times out and extend it according to the actual need. Over cooking may result in smoke and burns.
Microwave safe plastic cookware Some microwave safe plastic cookware might not be suitable for cooking foods with high fat and sugar content. Also, the preheating time specified in the dish instruction manual must not be exceeded CLEANING and MAINTENANCE Microwave oven care The oven should be cleaned regularly and any food deposits removed.
TIPS for cleaning Exterior: Wipe the enclosure with a dampened soft cloth Door: Using a dampened soft cloth, wipe clean the door and window Wipe the door seals and adjacent parts to remove any spill or spatter Wipe the control panel with a slightly dampened soft cloth Interior walls: Wipe clean the interior surfaces with a dampened soft cloth Wipe clean the waveguide cover to remove any food splashed...
socket and the fuse in your meter box. If both the wall socket and the fuse are functioning properly, CONTACT YOUR NEAREST SERVICE CENTER APPROVED. SERVICING SAFEGUARDS MICROWAVE RADIATION! It is hazardous for anyone, other than a qualified service technician, to carry out any service for repairing operation which involves removal of any cover which gives protection against exposure to microwave energy.
Page 20
The following conditions may cause undue microwave exposure during servicing. Improper fitting of magnetron; Improper matching of door interlock, door hinge and door; Improper fitting of switch support; Door, door seal or enclosure has been damaged. 1. if LED displays Err0 during working ,it indicates that sensor has been short circuit and you need replace it at the nearest repaired department.