JVC Everio Easy Start Manual page 2

File Backup (PC) using software
1) After connecting USB to and AC adapter to camcorder and
2) On the camcorder: use the Laser sensor to select Back Up
3) On the PC: click EVERIO_SD then
File Backup (PC and Mac) without using software
1) Connect camcorder to PC using the USB cable.
2) Open the LCD monitor to turn on the camcorder.
Customer Service
TOLL FREE: 1-800-252-5722
3) Create a folder to backup up
For our online tutorials please visit:
http://camcorder.jvc.com/tutorials.jsp
Register your EVERIO online at:
REGISTER.JVC.COM
and receive a special offer.
5) On the PC (Windows
JVC Company of America
A Division of JVC Americas Corp.
1700 Valley Road, Wayne, NJ 07470
www.jvc.com
LYT1975-001A SD_Video: This folder contains all your video fi les.
0708ASR-MW-OT
DCIM: This folder contains all your still images.
PC open LCD to turn camcorder on.
then press OK.
PowerCinema will start.
click OK.
When the progress bar disappears,
the process is complete.
4) On the camcorder: use
fi les into. the Laser sensor to select
Playback on PC then press
OK.
® ): 6) Select the folder that you
select [Open folder to view want to backup. Drag and
fi les using Windows Explorer] drop it in to the folder you
and click [OK]. created in (step 3).
On the PC (Mac): double click
EVERIO_SD
Preparation:
• Turn off both camcorder and TV.
AV Jack
DC Jack
AV Cable
To AC Outlet
AC Adapter
AV Input Jack
1) Plug in the supplied A/V cable to the camcorder. Then push
the single plug side into the A/V input. You must fi rst open
the cover for the A/V input.
2) Turn on the camcorder and the TV.
3) Slide the mode switch to select Video or Still
Image Mode
4) Press the SELECT PLAY/ REC button to put
SELECT
PLAY/REC
the camcorder in playback mode.
5) Slide your fi nger up and down on
the Laser Sensor to select the
desired thumbnail for video or still
image playback. Then press OK.
• If the aspect ratio of the image
is not correct as shown on the
right. Change the settings in 4:3 TV
16:9 TV
[SELECT TV TYPE] from the
menu.
• To display the camcorder's
on-screen display on TV Set
[DISPLAY ON TV] to [ON]
from the menu.
• How to record a File (video clip)
1) Slide the mode switch to select video mode.
2) Press the SELECT PLAY/REC button to set on recording
mode.
3) Press the UPLOAD button twice to "UPLOAD REC ON".
indicator appears.
4) Press the START/STOP button to start recording a video clip.
Recording stops automatically after 10 minutes.
• How to upload a File (video clip) to YouTube™
1) Install software from the supplied CD-ROM. (see "How to
Install")
2) After connecting USB and AC Adapter to camcorder and PC,
open the LCD to turn camcorder on.
3) On the camcorder: press the UPLOAD button.
PowerCinema starts automatically.
4) On the PC: click on the check box of desired fi le.
The " "mark appears on the left of the selected fi le.
s
To select other fi les, repeat this step.
5) Click [YouTube™].
6) Login your username and password.
Click [Next].
To create a YouTube™ account, click [Sign up to
YouTube™].
7) Select video category and broadcast option. Click [Next].
8) Click on the check box and then click [Upload].
Uploading starts.
Click [Cancel] to cancel procedure.
9) Click [Finish].
Trademark
YouTube and the YouTube logo are trademarks and/or
registered trademarks of YouTube LLC.