Box Settings; Printer Settings - Canon iR5055 Series Service Manual

Chapter 1
Mode
fax basic registration setup**
fax transmission function setup**
fax reception function setup**
fax addition line setup**

1.2.3.8 Box Settings

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
*Factory settings.
**Indicated when the appropriate accessory is installed.
Mode
set/register user box
print photo mode
read setup standard mode
set/register fax box**

1.2.3.9 Printer Settings

iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1-16
Description
reception info record: keep/*do not keep
register user telephone number**
telephone number: 20 characters max.
select line type**:
100V: *20 pps/10 pps/push
volume adjust
alarm volume: 0 to 8 (84)
communication volume: 0 to 8 (*4)
off-hook alarm: (*ON/OFF)
ECM transmission (*ON/OFF)
set pause length: 1 to 15 seconds (*2 seconds)
auto redial: (*ON/OFF)
number of redial sessions: 100V: 1-15(*2)
interval of redial session (min): 2 to 99 (*2)
redial at transmission error: 1st and error pages/all pages/off
pre-transmission dial tone check: (*ON/OFF)
ECM reception: (*ON/OFF)
select reception mode
*Automatic reception / modem dial-in FAX/TEL switch
fax/tel switchover: at ring start: 0 to 30 sec (*8), ring length: 15 to 300 sec (*17), post-ring operation:
end/*receive, voice answer: ON/*OFF
auto reception
modem dial-in fax/tel switchover
ring sound: ON (number of rings: 0 to n)/*OFF
remote reception: ON (remote reception ID: 00 to 99, *25)/*OFF
auto reception switchover: 1 to 99 seconds, *15 seconds)/*OFF
register user telephone number: 20 characters max.
register user abbreviation: 24 characters max.
select type of line: *20 pps/10 pps/push
select transmission line:
line 1: *priority on transmission/do not permit transmission
line 2: priority on transmission/do not permit transmission
T-1-12
Description
select box: 0-99
register box name: 24 characters max(one-byte characters).
ID No.: 0-9999999
file auto delete: 0=none, 1, 2, 3, 6, 12 hr; 1, 2, *3, 7, 30 days
URL transmission setup
Print when saving data from the print driver: ON/*OFF
reset
(ON/*OFF)
register/reset
select box: 0-49
register box name: 24 characters max(one-byte characters).
ID No.: 0-9999999
set URL transmission
reset
0015-4325
0015-4326