Bosch PFS 3000-2 Original Instructions Manual page 20

OBJ_BUCH-2024-003.book Page 20 Thursday, April 2, 2015 10:48 AM
20 | English
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is only intended for spraying emulsion and latex
paints, solvent-based and water-dilutable lacquers, glazes,
primers, clear lacquers, wood stains, oils (ALLPaint) and water.
The power tool is not suitable for spraying caustic solutions,
acidic coating materials and house paints.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Spray gun
2 Air cap
3 Union nut
4 Thumbwheel for spraying capacity
5 Trigger switch
6 Lock ring
7 Container for spray material
8 Hose port (spray gun)
9 Nozzle cap (white: for a "wall" application)
10 Nozzle cap (grey: for a "wood" application)
11 Filling sieve
12 Transfer bucket*
13 Nozzle needle
14 Container seal
15 Suction tube
16 Ventilation hole
17 Paint channel
18 Air hose
19 Bayonet lock
20 Base unit
21 Carrying strap
22 Carrying handle
23 Elastic band (hose holder)
24 Sliding switch for switching on/off and for air flow con-
trol
25 Cleaning brush
26 Air filter cover
27 Hose connection (base unit)
28 Accessory compartment
29 Air filter
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 162 | (2.4.15)
Technical Data
Fine-spray System
Article number
Rated power input
Spraying capacity
Required time for application
2
of paint on 2 m
Container capacity for spray
material
Length of air hose
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards:
EN 60745-1, EN 50580.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 02.04.2015
Noise/Vibration Information
Sound emission values determined according to
EN 60745-1, EN 50580.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-1, EN 50580:
2 2
a <2.5 m/s , K= 1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different appli-
cations, with different accessories or insertion tools or is poorly
maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
PFS 3000-2
3 603 B07 1..
W 650
ml/min 300
min 1
ml 1000
m 2
kg 3.7
/II
Bosch Power Tools