Service Adjustment Menu Operation - Sanyo PDG-DET100L Service Manual

Adjustments

Service Adjustment Menu Operation

to enter the service mode
To enter the "Service Mode", press and hold the
menu appears on the screen as follows.
to adjust service data
Select the adjustment group no. by pressing the
select the adjustment item no. by pressing the pointer
W or X button
. Refer to the "Service Adjustment Data Table" for further description of adjustment group no., item
no. and data value.
to exit the service mode
To exit the service mode, press the
Service Mode
Input Input 1
Image Standard
Group No.
0 0
Ver. 1.00
MeNu
MeNu button
oN/StANd-BY button
Group No.
Item No.
Data
32
Data value
Firmware
Version No.
SeLect button
and for more than 3 seconds. The service
(increase) or
U
button
or V
, and change the data value by pressing the
.
-38-
SeLect button
(decrease), and