General - Sony CAV-M1000ES Service Manual

CAV-M1000ES
Front panel of the Main Unit
1 2
1 ?/1 (POWER) switch
Press to turn the power on or off.
2 Learning IR window
Used to input remote codes into the Main
3 Display window
Displays various information.
4 Mode indicators
Display the current mode. These indicators turn off in
the NORMAL mode.
5 ZONE +/–
Press to select the zone in the NORMAL mode.
6 SOURCE SELECT +/–
Press to select the source component in the NORMAL
mode.
7 RS232C connector
Used to update the firmware of the Main Unit and to
upload/download setup data from a computer using
an RS232C cross cable.
8
SECTION 2

GENERAL

3
CHECK LEARN SETUP
PROGRAM
ENTER MODE
RS232C
7 8 9 q;
8 PROGRAM
9 Cursor/ENTER
Unit.
q; MODE
qa BACK
qs CANCEL
qd ZONE VOLUME +/–
qf ALL ZONE MUTING
4 5
ZONE
ZONE VOLUME ALL ZONE
BACK CANCEL MUTING
qa qs qd qf
Press to initiate a firmware update.
Press to select a menu.
Press repeatedly to select the mode.
Press to return to the previous layer of the menu.
Press to cancel the present operation and return to the
NORMAL mode.
Press to adjust the volume of the selected zone.
Press to set muting on or off in all zones.
This section is extracted
from instruction manual.
6
SOURCE SELECT