Connecting The Power Cord - Canon Fax-L260i User Manual

Connecting the Power Cord

Follow these guidelines when connecting your FAX-L260i to a power source:
The FAX-L260i is intended for domestic use only and requires 200–240 V AC.
Do not use it outside the country where it was purchased.
Use only the power cord that came with the unit. Using a longer cord or
extension cord can cause the FAX-L260i to malfunction.
Unplug the unit only by pulling on the plug itself. Never pull on the cord.
Do not plug the FAX-L260i into an outlet shared with an appliance such as an
air conditioner, computer, electric typewriter, or copier. These devices generate
electrical noise, which can interfere with the operation of the FAX-L260i.
Make sure nothing is laying on the power cord, and that the cord cannot be
walked on or tripped over.
Do not overload the electrical outlet. Make sure the total amperage used by all
the machines plugged into the outlet does not exceed the ampere rating of the
outlet's circuit breaker.
Do not plug the unit into an uninterruptible power supply (UPS).
Connect the power cord as follows:
1. Plug the supplied power cord into the power connector on the back of the FAX-
L260i.
Chapter 2 Setting Up Your FAX-L260i 2-15