Checking The Ip Address - D-Link DI-704P Quick Install Manual

Ethernet broadband router with print server

Hide thumbs Also See for DI-704P:

Make sure that TCP/IP protocol has been

installed in your computer.

Next, set the TCP/IP protocol to

"Obtain an IP Address automatically"

by doing the following:

• Go to Start>Settings

• Select "Control Panel"

• Double-click the "Network" icon

• Select the TCP/IP line that includes the

name of your network adapter card,

under the "Configuration" tab in the

"Network" window

• Click on "Properties" in this window

• The window at the right will appear

• Select the "IP Address" tab as shown

• Choose "Obtain an IP

address automatically"

• Click "OK"

Note: For information on setting the IP address of your computer manually

Next, find your IP Address by doing the following:

For Windows 98/ME:

• Go to Start>Run

• Type in "winipcfg"

• Click "OK"

For Windows 2000:

• Go to Start>Run

• Type "cmd"

• When the prompt

appears, type

"ipconfig"

• Hit "Enter"

• The window displayed on the next page will appear

Checking the IP Address

(a static IP address,) please see Appendix A in this guide.

-3-

Table of Contents