MW-145BT Quick Reference Guide Mobile Printer Before using this printer, be sure to read this Quick Reference Guide. www.brother.com...
Page 2
Microsoft Corporation in the United States and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Brother Industries, Ltd. under license. All other software and product names mentioned are trademarks or registered trademarks of their respective companies.
MW-145BT mobile printer filled with C-11 thermal paper (50 sheets). AC adapter (AD-210AUS/AD-210UK) CD-ROM (contains the software, the Brother Industries, Ltd. User’s Guide and the Software User’s Guide) (Powerplug may vary by country.) Quick Reference Guide Lithium ion Rechargeable battery pack...
Getting Started Installing the battery Danger Do not use this printer with any rechargeable battery other than that specified (BT-100), otherwise a fire or damage may result. DO NOT take off the black plastic that covers the battery. The battery connector should not be unnecessarily unplugged and reconnected, otherwise it may become damaged or the battery cord may break.
Page 5
Fit the battery cord into the groove as shown in the illustration. Install the battery cover by sliding it onto the back of the MW-145BT. Be careful that you do not catch the battery connector cord.
Charging Use the AC adapter designed specifically for this printer to charge the battery. After unpacking this printer, be sure to charge the battery fully before using it. Plug the AC adapter cable into the printer. Plug the AC adapter plug into a household electrical outlet (AC 220 V 240 V).
Page 7
Charging LED (Orange) With the charging LED, the status of the power sup- ply can be checked. The charging LED has two functions. (1) Checking the charging status (when the AC adapter is con- nected) LED status Printer status Constantly lit Charging Finished charging Flashing...
Turning the printer on/off Press and hold the power button for a short while, until the green or blue status LED illuminates. Power button → When the printer is turned on, the status LED is: Green (if Bluetooth is switched off) Blue (if Bluetooth is switched on) In order to prevent this printer from accidentally being turned on, it will not come on if the power button is lightly pressed.
Installing the paper cassette Slide the paper cassette cover (on the top of the printer) in the direction shown in 1. → The paper cassette cover will open in the direction indicated by 2. Insert the paper cassette. Paper type indication The paper type indication on the paper cassette should face up.
Page 10
If the paper is not fed correctly Clean the pick-up roller. Open the paper cassette cover. Rotate the pick-up roller in the Pick-up roller feed direction until it stops. Pick-up roller Attach a piece of cellophane tape to the rubber pick-up roller.
Directive 2006/95/EC. The Declaration of Conformity (DoC) is on our Web site. Please go to http://solutions.brother.com -> choose region (eg. Europe) -> choose country -> choose your model -> choose “Manuals”-> choose Declaration of Conformity (*Select Language when required).