Kenmore 110.2513*410 Use & Care Manual page 10

7.
Select wash temperature
Once you select a cycle, select the wash temperature by turning
the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your items.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool Lights
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cool Darks
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cold
Warm water is added to assist in
soil removal and to help dissolve
detergents.
10
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
8.
Select cycle options, if desired
If you would like to add Two Rinses and/or use the
STAINBOOST option, turn the knob for that feature.
The STAINBOOST option provides enhanced cleaning
action for tough stains. It will add additional agitation
and soak time to the cycle.
9.
Press START/Pause/Unlock Lid
to begin wash cycle
Press the START/PAUSE/Unlock Lid button to start the wash
cycle. When the cycle has finished, the COMPLETE indicator
will light. Promptly remove items after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Press START/PAUSE/Unlock Lid; the lid will unlock once the
washer movement has stopped. This may take several minutes
if the load was spinning at high speed. Then close lid and press
START/PAUSE/Unlock Lid again to restart the cycle.
If lid is left open for more than 10 minutes, the water will pump
out automatically.