Dell W2600 Setting Up page 2

2
Install batteries in your remote control
Additional tips for setting up and using your Dell W2600 26" Wide LCD Monitor (With TV Functionality)
Dell W2600 26
To access the on-screen-display (OSD) and adjust the
settings for your wide LCD monitor, including select-
ing the correct input source, press Menu on the
remote control. For additional information about the
OSD, see your Owner's Manual.
OSD
[ ]
OSD
Printed in China
Setting up Your Dell W2600 26" Wide LCD Monitor (With TV Functionality)
Dell W2600 26
3
Plug in and turn on your wide LCD monitor
TV
Select the proper input source based on which
connectors you used.
VGA— VGA connector on the bottom of the wide LCD monitor
DVI — DVI-HDCP connector on the bottom of the wide LCD monitor
TV — ANT/Cable connector on the bottom of the wide LCD monitor
AV1 — Composite connector on the side of the wide LCD monitor
AV2 — Composite connector on the bottom of the wide LCD monitor
AV3 — S-Video connector on the side of the wide LCD monitor
AV4 — S-Video connector on the bottom of the wide LCD monitor
AV5 — Component connector on the bottom of the wide LCD monitor
AV6 — Component connector on the bottom of the wide LCD monitor
D4 — D4 Connector on the bottom of the wide LCD monitor
Information in this document is subject to change
without notice.
© 2004 Dell Inc. All rights reserved. © 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written Dell Inc.
permission of Dell Inc. is strictly forbidden.
Dell Dell Dell Inc.
Dell and the DELL logo are trademarks of Dell Inc. Dell
disclaims proprietary interest in the marks and names of Dell Inc.
others.
August 2004 2004 8
TV
Select the proper input source for your wide
4
LCD monitor
VGA — VGA
DVI — DVI-HDCP
TV — /
AV1 —
AV2 —
AV3 — S-Video
AV4 — S-Video
AV5 —
AV6 —
D4 — D4
5 Select the proper input source for your
wide LCD monitor
If you connected your wide LCD monitor using the
ANT/Cable connector, select TV from the Input Select
menu. After you select the input source, select Setup
from the Main Menu and then select Channel Setup.
/
[ ]
[TV]
] [ ] [
]
[