Setups; Hdmi Cec - Sanyo FWBP505F K Owner's Manual

10.

SETUPS

10.1. HDMI CEC

A A A
HOME ˝Settings˝ ˝HDMI˝ ˝HDMI CEC˝
HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard. This function may
not work properly depending on the device connected to the unit. When ˝HDMI CEC˝ setting is set to ˝On˝ the
functions listed below will be available.
C One Touch Play
When the buttons below are pressed then operations are performed on this unit, the TV will automatically be
Turned On and switched to the appropriate video Source Input.
Buttons for one touch play:
• [ (PLAY/PAUSE)] (on the unit)
• [ (PLAY)], [ (SKIP)], [ (SKIP)], [HOME] (on the remote control)
• [DISC MENU] (on the remote control when the a disc is inserted in the unit)
C One Touch Standby
When you press and hold [ (POWER-ON)] for 2 seconds, it turns Off the TV fi rst and then Turns Off the power
on this unit.
When the connected HDMI CEC compatible display device is Turned Off fi rst, then it Turns Off the power to this
unit.
C System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the Player
Menu Language (OSD menu language) for this unit. ˝Language˝ under ˝Playback˝ on page 32 for available
languages.
• Feature is available only when ˝Auto˝ is selected in the Setup Menu ˝Language˝ section in ˝Settings˝ while
connected via an HDMI cable.
EN 34