Table of Contents
Advertisement
Congratulations on your purchase of a Toshiba CD-RW/DVD-ROM drive and Kit.
The following information will help you in the simple installation of your new
CD-RW/DVD-ROM drive.
CHECKING YOUR KIT PACKAGING
Please unpack your CD-RW/DVD-ROM kit, and assure that you have the follow-
ing items:
l Toshiba CD-RW/DVD-ROM Drive
l CD-R Blank Media CD
l CD-RW Blank Media CD
l CyberLink PowerDVD
l
®
Adaptec
Easy CD Creator
l
BIG WIG DVD KEEPER SERIES TWO disc
l CD-RW/DVD-ROM Installation Instructions (this manual)
l Quick Start Guide
l Mounting screws
l IDE BUS cable
l DVD/CD sound cable
Additional items you may need that are not included in the kit are:
l Phillips Screwdriver
l Mounting hardware (i.e. some computer systems use mounting rails).
SYSTEM REQUIREMENTS
The CD-RW/DVD-ROM kit requires the following:
At least 55MB of free hard disk space
At least 32MB of RAM
*Pentium II processor at 266MHz or higher or....
*Celeron 300A processor or higher or....
*K6-2 processor at 300MHz or higher
Display card supporting DirectDraw
16-bit or better sound card
™
Microsoft
Amplified stereo speakers
* These requirements are only required if you are using the CyberLink PowerDVD
software. The SD-R1002 CD-RW/DVD-ROM will work as a CD-ROM and CD-
RW when using a lower speed Pentium system.
™
Software
™
(4)
Windows 95 or higher
CD Recording Software Package
™
1
Advertisement
Table of Contents
