Charging And Recording Time - Panasonic HX-A1M Basic Operating Instructions Manual

Wearable camera
Hide thumbs Also See for HX-A1M:
Table of Contents

Advertisement

Charging and recording time

∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
Charging time
3 h
≥ "h" is an abbreviation for hour, "min" for minute and "s" for second.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning this unit on/off, etc.
≥ The power lamp flashes (Flashing with approx. 0.5 second period (off for approx. 0.25 second, on
for approx. 0.25 second)) when the remaining battery time becomes low.
You can check the battery level by looking at the "Image App" screen (l 26) or the recording
mode lamps (l 16).
≥ This unit heats up after use or charging. This is not a malfunction.
≥ For information about charging with a mobile USB charger or an AC adaptor, check the support
site.
http://panasonic.jp/support/global/cs/e_cam/index.html
(This site is English only.)
The socket outlet shall be installed near the equipment and shall be easily accessible.
When the Power lamp is flashing during charging
Flashing with approx. 0.5 second period (off for approx. 0.25 second, on for approx. 0.25 second):
≥ Check that the USB terminals of this unit or the connecting device, such as PC are not dirty or
covered with a foreign object, and reconnect correctly. If a foreign object or dirt is present, turn off
this unit before removing.
≥ The environment is at an extremely high or low temperature. Wait until the temperature has
returned to an appropriate level and try charging again. If you are still unable to charge, there may
be a fault in this unit or the connecting device.
Flashing with approx. 4 second period (off for approx. 2 seconds, on for approx. 2 seconds):
≥ When the battery is over discharged or the temperature of the battery is too high or low. It can be
charged, but it may take a few hours to complete the charging normally.
≥ It will flash in approx. 2 second intervals when normal charging resumes. Even in such cases, it
may start flashing in approx. 4 second intervals until charging is completed depending on the
conditions of use.
Off:
≥ Charging has finished.
14
SQT0886 (ENG)
Picture size/Frame rate
[1920k1080/30p]
[1280k720/60p]
[1280k720/30p]
[848k480/30p]
[1280k720/60fps]
[848k480/120fps]
Maximum continuous
recordable time
1 h 15 min
1 h 5 min
1 h 20 min
1 h 25 min
1 h 10 min
Actual recordable
time
35 min
40 min
35 min

Advertisement

Table of Contents
loading

Table of Contents