Broadband Router - D-Link DI-704P Quick Installation Manual

Connecting Additional Computers To The
DI-704P Broadband Router
Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect
your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet
LAN ports on the back panel of the DI-704P.
When you have completed the steps in this Quick Installation Guide, your
connected network should look similar to this:
Cable or DSL
Modem
Computers connected
to the LAN Ports
DI-704P Ethernet

Broadband Router

LAN Port LEDs.
LAN ports on the back of the
DI-704P have a corresponding
LED light on the front panel of
the unit. When a proper
connection has been made to
a computer that is ON, the
LED on the front panel should
illuminate.
Connect a printer
to the parallel port
For optional printer setup, please refer to
the DI-704P's Manual
Each of the