Head Management Sensor - Canon imagePROGRAF iPF5000 Series Service Manual

9) Remove the four screws[1] and one joint[3], and then remove the two ink tank unit F[2].
b) Removing the valve motor unit.
1) When removing the valve motor unit, remove the ink tank cover.
2) Remove the two screws[1], disconnect the the two connectors[2], and then remove the valve motor unit[3].

4.3.13 Head Management Sensor

a) Removing the head management sensor
1) Remove the screw[1], disconnect the connector[2], and then remove the head management sensor[3].
[1]
[3]
[2]
F-4-87
[1]
[1]
[3]
[2]
F-4-88
[3]
[2]
[1]
F-4-89
Chapter 4
0013-3845
4-31