BIT STORAGE
See Figure 6.
When not in use, bits provided with the tool can be placed
in the storage area located at the bottom of the tool handle.
BIT STORAGE AREA
OPERATION
INSTALLING BITS
See Figure 7.
Lock the switch trigger by placing the direction of
rotation selector in the center position.
Pull the coupler forward and hold in position.
Insert bit straight into coupler as shown.
SCREWDRIVER
Slide the coupler back slowly and release.
BITS
PULL COUPLER
Fig. 6
REMOVING BITS
See Figure 7.
Lock the switch trigger by placing the direction of
rotation selector in the center position.
Pull the coupler forward and hold in position.
Pull bit straight out of coupler.
13
RELEASE COUPLER
1
FORWARD
BIT
INSERT BIT
2
LOCKING GROOVE
3
COUPLER
Fig. 7