Flash Programming; Mb91360 Flash Programmer - Fujitsu CREMSON MODULAR STARTERKIT User Manual

Cremson Modular Starterkit
Chapter 5 Flash Programming

5 Flash Programming

Whenever your application has been developed, debugged and tested as explained in the
last chapter, it can be programmed to the internal flash ROM using the „MB91360 Flash
Programmer". This tool is a general flash programming utility, which allows programming the
internal flash ROM without any restrictions given by the starterkit.

5.1 MB91360 Flash Programmer

The tool „MB91360 Flash Programmer" is a general flash programming tool which does not
take care of the special features of this Starterkit. The tool can be used to program the
debugging kernel (MB91F369 board) or any applications linked for the embedded flash area
directly (without the possibility to have any debugging functions later on). In this case, the
evaluation board will act as a target system only.
CAUTION: Take special care not to write anything to location 0FFEF4, the „security vector".
If you do, you will not be able to re-program the device ever again! See the hardware manual
for details!
Make sure you have installed the Flash Programmer from your CD-ROM. The package
includes the executable (Flashprg.exe) as well as some binary files (Brloadxx.bin) and a
user's guide (Flashprg.pdf).
Figure 3: MB91360 Flash Programmer
© Fujitsu Microelectronics Europe GmbH - 21 -